From d82a73f1180a5f201397b92e6f6db33411cbe686 Mon Sep 17 00:00:00 2001 From: Joshua Hill Date: Sat, 6 Nov 2010 18:09:53 -0400 Subject: updated libirecovery to the latest version from greenpois0n. it at least compiles on osx now, I need to test on other systems --- include/libusb-1.0/os/linux_usbfs.c | 2220 +++++++++++++++++++++++++++++++++++ 1 file changed, 2220 insertions(+) create mode 100644 include/libusb-1.0/os/linux_usbfs.c (limited to 'include/libusb-1.0/os/linux_usbfs.c') diff --git a/include/libusb-1.0/os/linux_usbfs.c b/include/libusb-1.0/os/linux_usbfs.c new file mode 100644 index 0000000..a44688d --- /dev/null +++ b/include/libusb-1.0/os/linux_usbfs.c @@ -0,0 +1,2220 @@ +/* + * Linux usbfs backend for libusb + * Copyright (C) 2007-2009 Daniel Drake + * Copyright (c) 2001 Johannes Erdfelt + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "libusb.h" +#include "libusbi.h" +#include "linux_usbfs.h" + +/* sysfs vs usbfs: + * opening a usbfs node causes the device to be resumed, so we attempt to + * avoid this during enumeration. + * + * sysfs allows us to read the kernel's in-memory copies of device descriptors + * and so forth, avoiding the need to open the device: + * - The binary "descriptors" file was added in 2.6.23. + * - The "busnum" file was added in 2.6.22 + * - The "devnum" file has been present since pre-2.6.18 + * - the "bConfigurationValue" file has been present since pre-2.6.18 + * + * If we have bConfigurationValue, busnum, and devnum, then we can determine + * the active configuration without having to open the usbfs node in RDWR mode. + * We assume this is the case if we see the busnum file (indicates 2.6.22+). + * The busnum file is important as that is the only way we can relate sysfs + * devices to usbfs nodes. + * + * If we also have descriptors, we can obtain the device descriptor and active + * configuration without touching usbfs at all. + * + * The descriptors file originally only contained the active configuration + * descriptor alongside the device descriptor, but all configurations are + * included as of Linux 2.6.26. + */ + +/* endianness for multi-byte fields: + * + * Descriptors exposed by usbfs have the multi-byte fields in the device + * descriptor as host endian. Multi-byte fields in the other descriptors are + * bus-endian. The kernel documentation says otherwise, but it is wrong. + */ + +static const char *usbfs_path = NULL; + +/* Linux 2.6.32 adds support for a bulk continuation URB flag. this basically + * allows us to mark URBs as being part of a specific logical transfer when + * we submit them to the kernel. then, on any error error except a + * cancellation, all URBs within that transfer will be cancelled with the + * endpoint is disabled, meaning that no more data can creep in during the + * time it takes to cancel the remaining URBs. + * + * The BULK_CONTINUATION flag must be set on all URBs within a bulk transfer + * (in either direction) except the first. + * For IN transfers, we must also set SHORT_NOT_OK on all the URBs. + * For OUT transfers, SHORT_NOT_OK must not be set. The effective behaviour + * (where an OUT transfer does not complete, the rest of the URBs in the + * transfer get cancelled) is already in effect, and setting this flag is + * disallowed (a kernel with USB debugging enabled will reject such URBs). + */ +static int supports_flag_bulk_continuation = -1; + +/* clock ID for monotonic clock, as not all clock sources are available on all + * systems. appropriate choice made at initialization time. */ +static clockid_t monotonic_clkid = -1; + +/* do we have a busnum to relate devices? this also implies that we can read + * the active configuration through bConfigurationValue */ +static int sysfs_can_relate_devices = -1; + +/* do we have a descriptors file? */ +static int sysfs_has_descriptors = -1; + +struct linux_device_priv { + char *sysfs_dir; + unsigned char *dev_descriptor; + unsigned char *config_descriptor; +}; + +struct linux_device_handle_priv { + int fd; +}; + +enum reap_action { + NORMAL = 0, + /* submission failed after the first URB, so await cancellation/completion + * of all the others */ + SUBMIT_FAILED, + + /* cancelled by user or timeout */ + CANCELLED, + + /* completed multi-URB transfer in non-final URB */ + COMPLETED_EARLY, + + /* one or more urbs encountered a low-level error */ + ERROR, +}; + +struct linux_transfer_priv { + union { + struct usbfs_urb *urbs; + struct usbfs_urb **iso_urbs; + }; + + enum reap_action reap_action; + int num_urbs; + unsigned int num_retired; + enum libusb_transfer_status reap_status; + + /* next iso packet in user-supplied transfer to be populated */ + int iso_packet_offset; +}; + +static void __get_usbfs_path(struct libusb_device *dev, char *path) +{ + snprintf(path, PATH_MAX, "%s/%03d/%03d", usbfs_path, dev->bus_number, + dev->device_address); +} + +static struct linux_device_priv *__device_priv(struct libusb_device *dev) +{ + return (struct linux_device_priv *) dev->os_priv; +} + +static struct linux_device_handle_priv *__device_handle_priv( + struct libusb_device_handle *handle) +{ + return (struct linux_device_handle_priv *) handle->os_priv; +} + +static int check_usb_vfs(const char *dirname) +{ + DIR *dir; + struct dirent *entry; + int found = 0; + + dir = opendir(dirname); + if (!dir) + return 0; + + while ((entry = readdir(dir)) != NULL) { + if (entry->d_name[0] == '.') + continue; + + /* We assume if we find any files that it must be the right place */ + found = 1; + break; + } + + closedir(dir); + return found; +} + +static const char *find_usbfs_path(void) +{ + const char *path = "/dev/bus/usb"; + const char *ret = NULL; + + if (check_usb_vfs(path)) { + ret = path; + } else { + path = "/proc/bus/usb"; + if (check_usb_vfs(path)) + ret = path; + } + + usbi_dbg("found usbfs at %s", ret); + return ret; +} + +/* the monotonic clock is not usable on all systems (e.g. embedded ones often + * seem to lack it). fall back to REALTIME if we have to. */ +static clockid_t find_monotonic_clock(void) +{ + struct timespec ts; + int r; + +#ifdef CLOCK_MONOTONIC + /* Linux 2.6.28 adds CLOCK_MONOTONIC_RAW but we don't use it + * because it's not available through timerfd */ + r = clock_gettime(CLOCK_MONOTONIC, &ts); + if (r == 0) + return CLOCK_MONOTONIC; + usbi_dbg("monotonic clock doesn't work, errno %d", errno); +#endif + + return CLOCK_REALTIME; +} + +/* bulk continuation URB flag available from Linux 2.6.32 */ +static int check_flag_bulk_continuation(void) +{ + struct utsname uts; + int sublevel; + + if (uname(&uts) < 0) + return -1; + if (strlen(uts.release) < 4) + return 0; + if (strncmp(uts.release, "2.6.", 4) != 0) + return 0; + + sublevel = atoi(uts.release + 4); + return sublevel >= 32; +} + +static int op_init(struct libusb_context *ctx) +{ + struct stat statbuf; + int r; + + usbfs_path = find_usbfs_path(); + if (!usbfs_path) { + usbi_err(ctx, "could not find usbfs"); + return LIBUSB_ERROR_OTHER; + } + + if (monotonic_clkid == -1) + monotonic_clkid = find_monotonic_clock(); + + if (supports_flag_bulk_continuation == -1) { + supports_flag_bulk_continuation = check_flag_bulk_continuation(); + if (supports_flag_bulk_continuation == -1) { + usbi_err(ctx, "error checking for bulk continuation support"); + return LIBUSB_ERROR_OTHER; + } + } + + if (supports_flag_bulk_continuation) + usbi_dbg("bulk continuation flag supported"); + + r = stat(SYSFS_DEVICE_PATH, &statbuf); + if (r == 0 && S_ISDIR(statbuf.st_mode)) { + usbi_dbg("found usb devices in sysfs"); + } else { + usbi_dbg("sysfs usb info not available"); + sysfs_has_descriptors = 0; + sysfs_can_relate_devices = 0; + } + + return 0; +} + +static int usbfs_get_device_descriptor(struct libusb_device *dev, + unsigned char *buffer) +{ + struct linux_device_priv *priv = __device_priv(dev); + + /* return cached copy */ + memcpy(buffer, priv->dev_descriptor, DEVICE_DESC_LENGTH); + return 0; +} + +static int __open_sysfs_attr(struct libusb_device *dev, const char *attr) +{ + struct linux_device_priv *priv = __device_priv(dev); + char filename[PATH_MAX]; + int fd; + + snprintf(filename, PATH_MAX, "%s/%s/%s", + SYSFS_DEVICE_PATH, priv->sysfs_dir, attr); + fd = open(filename, O_RDONLY); + if (fd < 0) { + usbi_err(DEVICE_CTX(dev), + "open %s failed ret=%d errno=%d", filename, fd, errno); + return LIBUSB_ERROR_IO; + } + + return fd; +} + +static int sysfs_get_device_descriptor(struct libusb_device *dev, + unsigned char *buffer) +{ + int fd; + ssize_t r; + + /* sysfs provides access to an in-memory copy of the device descriptor, + * so we use that rather than keeping our own copy */ + + fd = __open_sysfs_attr(dev, "descriptors"); + if (fd < 0) + return fd; + + r = read(fd, buffer, DEVICE_DESC_LENGTH);; + close(fd); + if (r < 0) { + usbi_err(DEVICE_CTX(dev), "read failed, ret=%d errno=%d", fd, errno); + return LIBUSB_ERROR_IO; + } else if (r < DEVICE_DESC_LENGTH) { + usbi_err(DEVICE_CTX(dev), "short read %d/%d", r, DEVICE_DESC_LENGTH); + return LIBUSB_ERROR_IO; + } + + return 0; +} + +static int op_get_device_descriptor(struct libusb_device *dev, + unsigned char *buffer, int *host_endian) +{ + if (sysfs_has_descriptors) { + return sysfs_get_device_descriptor(dev, buffer); + } else { + *host_endian = 1; + return usbfs_get_device_descriptor(dev, buffer); + } +} + +static int usbfs_get_active_config_descriptor(struct libusb_device *dev, + unsigned char *buffer, size_t len) +{ + struct linux_device_priv *priv = __device_priv(dev); + if (!priv->config_descriptor) + return LIBUSB_ERROR_NOT_FOUND; /* device is unconfigured */ + + /* retrieve cached copy */ + memcpy(buffer, priv->config_descriptor, len); + return 0; +} + +/* read the bConfigurationValue for a device */ +static int sysfs_get_active_config(struct libusb_device *dev, int *config) +{ + char *endptr; + char tmp[4] = {0, 0, 0, 0}; + long num; + int fd; + size_t r; + + fd = __open_sysfs_attr(dev, "bConfigurationValue"); + if (fd < 0) + return fd; + + r = read(fd, tmp, sizeof(tmp)); + close(fd); + if (r < 0) { + usbi_err(DEVICE_CTX(dev), + "read bConfigurationValue failed ret=%d errno=%d", r, errno); + return LIBUSB_ERROR_IO; + } else if (r == 0) { + usbi_err(DEVICE_CTX(dev), "device unconfigured"); + *config = -1; + return 0; + } + + if (tmp[sizeof(tmp) - 1] != 0) { + usbi_err(DEVICE_CTX(dev), "not null-terminated?"); + return LIBUSB_ERROR_IO; + } else if (tmp[0] == 0) { + usbi_err(DEVICE_CTX(dev), "no configuration value?"); + return LIBUSB_ERROR_IO; + } + + num = strtol(tmp, &endptr, 10); + if (endptr == tmp) { + usbi_err(DEVICE_CTX(dev), "error converting '%s' to integer", tmp); + return LIBUSB_ERROR_IO; + } + + *config = (int) num; + return 0; +} + +/* takes a usbfs/descriptors fd seeked to the start of a configuration, and + * seeks to the next one. */ +static int seek_to_next_config(struct libusb_context *ctx, int fd, + int host_endian) +{ + struct libusb_config_descriptor config; + unsigned char tmp[6]; + off_t off; + int r; + + /* read first 6 bytes of descriptor */ + r = read(fd, tmp, sizeof(tmp)); + if (r < 0) { + usbi_err(ctx, "read failed ret=%d errno=%d", r, errno); + return LIBUSB_ERROR_IO; + } else if (r < sizeof(tmp)) { + usbi_err(ctx, "short descriptor read %d/%d", r, sizeof(tmp)); + return LIBUSB_ERROR_IO; + } + + /* seek forward to end of config */ + usbi_parse_descriptor(tmp, "bbwbb", &config, host_endian); + off = lseek(fd, config.wTotalLength - sizeof(tmp), SEEK_CUR); + if (off < 0) { + usbi_err(ctx, "seek failed ret=%d errno=%d", off, errno); + return LIBUSB_ERROR_IO; + } + + return 0; +} + +static int sysfs_get_active_config_descriptor(struct libusb_device *dev, + unsigned char *buffer, size_t len) +{ + int fd; + ssize_t r; + off_t off; + int to_copy; + int config; + unsigned char tmp[6]; + + r = sysfs_get_active_config(dev, &config); + if (r < 0) + return r; + if (config == -1) + return LIBUSB_ERROR_NOT_FOUND; + + usbi_dbg("active configuration %d", config); + + /* sysfs provides access to an in-memory copy of the device descriptor, + * so we use that rather than keeping our own copy */ + + fd = __open_sysfs_attr(dev, "descriptors"); + if (fd < 0) + return fd; + + /* device might have been unconfigured since we read bConfigurationValue, + * so first check that there is any config descriptor data at all... */ + off = lseek(fd, 0, SEEK_END); + if (off < 1) { + usbi_err(DEVICE_CTX(dev), "end seek failed, ret=%d errno=%d", + off, errno); + close(fd); + return LIBUSB_ERROR_IO; + } else if (off == DEVICE_DESC_LENGTH) { + close(fd); + return LIBUSB_ERROR_NOT_FOUND; + } + + off = lseek(fd, DEVICE_DESC_LENGTH, SEEK_SET); + if (off < 0) { + usbi_err(DEVICE_CTX(dev), "seek failed, ret=%d errno=%d", off, errno); + close(fd); + return LIBUSB_ERROR_IO; + } + + /* unbounded loop: we expect the descriptor to be present under all + * circumstances */ + while (1) { + r = read(fd, tmp, sizeof(tmp)); + if (r < 0) { + usbi_err(DEVICE_CTX(dev), "read failed, ret=%d errno=%d", + fd, errno); + return LIBUSB_ERROR_IO; + } else if (r < sizeof(tmp)) { + usbi_err(DEVICE_CTX(dev), "short read %d/%d", r, sizeof(tmp)); + return LIBUSB_ERROR_IO; + } + + /* check bConfigurationValue */ + if (tmp[5] == config) + break; + + /* try the next descriptor */ + off = lseek(fd, 0 - sizeof(tmp), SEEK_CUR); + if (off < 0) + return LIBUSB_ERROR_IO; + + r = seek_to_next_config(DEVICE_CTX(dev), fd, 1); + if (r < 0) + return r; + } + + to_copy = (len < sizeof(tmp)) ? len : sizeof(tmp); + memcpy(buffer, tmp, to_copy); + if (len > sizeof(tmp)) { + r = read(fd, buffer + sizeof(tmp), len - sizeof(tmp)); + if (r < 0) { + usbi_err(DEVICE_CTX(dev), "read failed, ret=%d errno=%d", + fd, errno); + r = LIBUSB_ERROR_IO; + } else if (r == 0) { + usbi_dbg("device is unconfigured"); + r = LIBUSB_ERROR_NOT_FOUND; + } else if (r < len - sizeof(tmp)) { + usbi_err(DEVICE_CTX(dev), "short read %d/%d", r, len); + r = LIBUSB_ERROR_IO; + } + } else { + r = 0; + } + + close(fd); + return r; +} + +static int op_get_active_config_descriptor(struct libusb_device *dev, + unsigned char *buffer, size_t len, int *host_endian) +{ + if (sysfs_has_descriptors) { + return sysfs_get_active_config_descriptor(dev, buffer, len); + } else { + return usbfs_get_active_config_descriptor(dev, buffer, len); + } +} + +/* takes a usbfs fd, attempts to find the requested config and copy a certain + * amount of it into an output buffer. */ +static int get_config_descriptor(struct libusb_context *ctx, int fd, + uint8_t config_index, unsigned char *buffer, size_t len) +{ + off_t off; + ssize_t r; + + off = lseek(fd, DEVICE_DESC_LENGTH, SEEK_SET); + if (off < 0) { + usbi_err(ctx, "seek failed ret=%d errno=%d", off, errno); + return LIBUSB_ERROR_IO; + } + + /* might need to skip some configuration descriptors to reach the + * requested configuration */ + while (config_index > 0) { + r = seek_to_next_config(ctx, fd, 0); + if (r < 0) + return r; + config_index--; + } + + /* read the rest of the descriptor */ + r = read(fd, buffer, len); + if (r < 0) { + usbi_err(ctx, "read failed ret=%d errno=%d", r, errno); + return LIBUSB_ERROR_IO; + } else if (r < len) { + usbi_err(ctx, "short output read %d/%d", r, len); + return LIBUSB_ERROR_IO; + } + + return 0; +} + +static int op_get_config_descriptor(struct libusb_device *dev, + uint8_t config_index, unsigned char *buffer, size_t len, int *host_endian) +{ + char filename[PATH_MAX]; + int fd; + int r; + + /* always read from usbfs: sysfs only has the active descriptor + * this will involve waking the device up, but oh well! */ + + /* FIXME: the above is no longer true, new kernels have all descriptors + * in the descriptors file. but its kinda hard to detect if the kernel + * is sufficiently new. */ + + __get_usbfs_path(dev, filename); + fd = open(filename, O_RDONLY); + if (fd < 0) { + usbi_err(DEVICE_CTX(dev), + "open '%s' failed, ret=%d errno=%d", filename, fd, errno); + return LIBUSB_ERROR_IO; + } + + r = get_config_descriptor(DEVICE_CTX(dev), fd, config_index, buffer, len); + close(fd); + return r; +} + +/* cache the active config descriptor in memory. a value of -1 means that + * we aren't sure which one is active, so just assume the first one. + * only for usbfs. */ +static int cache_active_config(struct libusb_device *dev, int fd, + int active_config) +{ + struct linux_device_priv *priv = __device_priv(dev); + struct libusb_config_descriptor config; + unsigned char tmp[8]; + unsigned char *buf; + int idx; + int r; + + if (active_config == -1) { + idx = 0; + } else { + r = usbi_get_config_index_by_value(dev, active_config, &idx); + if (r < 0) + return r; + if (idx == -1) + return LIBUSB_ERROR_NOT_FOUND; + } + + r = get_config_descriptor(DEVICE_CTX(dev), fd, idx, tmp, sizeof(tmp)); + if (r < 0) { + usbi_err(DEVICE_CTX(dev), "first read error %d", r); + return r; + } + + usbi_parse_descriptor(tmp, "bbw", &config, 0); + buf = malloc(config.wTotalLength); + if (!buf) + return LIBUSB_ERROR_NO_MEM; + + r = get_config_descriptor(DEVICE_CTX(dev), fd, idx, buf, + config.wTotalLength); + if (r < 0) { + free(buf); + return r; + } + + if (priv->config_descriptor) + free(priv->config_descriptor); + priv->config_descriptor = buf; + return 0; +} + +/* send a control message to retrieve active configuration */ +static int usbfs_get_active_config(struct libusb_device *dev, int fd) +{ + unsigned char active_config = 0; + int r; + + struct usbfs_ctrltransfer ctrl = { + .bmRequestType = LIBUSB_ENDPOINT_IN, + .bRequest = LIBUSB_REQUEST_GET_CONFIGURATION, + .wValue = 0, + .wIndex = 0, + .wLength = 1, + .timeout = 1000, + .data = &active_config + }; + + r = ioctl(fd, IOCTL_USBFS_CONTROL, &ctrl); + if (r < 0) { + if (errno == ENODEV) + return LIBUSB_ERROR_NO_DEVICE; + + /* we hit this error path frequently with buggy devices :( */ + usbi_warn(DEVICE_CTX(dev), + "get_configuration failed ret=%d errno=%d", r, errno); + return LIBUSB_ERROR_IO; + } + + return active_config; +} + +static int initialize_device(struct libusb_device *dev, uint8_t busnum, + uint8_t devaddr, const char *sysfs_dir) +{ + struct linux_device_priv *priv = __device_priv(dev); + unsigned char *dev_buf; + char path[PATH_MAX]; + int fd; + int active_config = 0; + int device_configured = 1; + ssize_t r; + + dev->bus_number = busnum; + dev->device_address = devaddr; + + if (sysfs_dir) { + priv->sysfs_dir = malloc(strlen(sysfs_dir) + 1); + if (!priv->sysfs_dir) + return LIBUSB_ERROR_NO_MEM; + strcpy(priv->sysfs_dir, sysfs_dir); + } + + if (sysfs_has_descriptors) + return 0; + + /* cache device descriptor in memory so that we can retrieve it later + * without waking the device up (op_get_device_descriptor) */ + + priv->dev_descriptor = NULL; + priv->config_descriptor = NULL; + + if (sysfs_can_relate_devices) { + int tmp = sysfs_get_active_config(dev, &active_config); + if (tmp < 0) + return tmp; + if (active_config == -1) + device_configured = 0; + } + + __get_usbfs_path(dev, path); + fd = open(path, O_RDWR); + if (fd < 0 && errno == EACCES) { + fd = open(path, O_RDONLY); + /* if we only have read-only access to the device, we cannot + * send a control message to determine the active config. just + * assume the first one is active. */ + active_config = -1; + } + + if (fd < 0) { + usbi_err(DEVICE_CTX(dev), "open failed, ret=%d errno=%d", fd, errno); + return LIBUSB_ERROR_IO; + } + + if (!sysfs_can_relate_devices) { + if (active_config == -1) { + /* if we only have read-only access to the device, we cannot + * send a control message to determine the active config. just + * assume the first one is active. */ + usbi_warn(DEVICE_CTX(dev), "access to %s is read-only; cannot " + "determine active configuration descriptor", path); + } else { + active_config = usbfs_get_active_config(dev, fd); + if (active_config == LIBUSB_ERROR_IO) { + /* buggy devices sometimes fail to report their active config. + * assume unconfigured and continue the probing */ + usbi_warn(DEVICE_CTX(dev), "couldn't query active " + "configuration, assumung unconfigured"); + device_configured = 0; + } else if (active_config < 0) { + close(fd); + return active_config; + } else if (active_config == 0) { + /* some buggy devices have a configuration 0, but we're + * reaching into the corner of a corner case here, so let's + * not support buggy devices in these circumstances. + * stick to the specs: a configuration value of 0 means + * unconfigured. */ + usbi_dbg("active cfg 0? assuming unconfigured device"); + device_configured = 0; + } + } + } + + dev_buf = malloc(DEVICE_DESC_LENGTH); + if (!dev_buf) { + close(fd); + return LIBUSB_ERROR_NO_MEM; + } + + r = read(fd, dev_buf, DEVICE_DESC_LENGTH); + if (r < 0) { + usbi_err(DEVICE_CTX(dev), + "read descriptor failed ret=%d errno=%d", fd, errno); + free(dev_buf); + close(fd); + return LIBUSB_ERROR_IO; + } else if (r < DEVICE_DESC_LENGTH) { + usbi_err(DEVICE_CTX(dev), "short descriptor read (%d)", r); + free(dev_buf); + close(fd); + return LIBUSB_ERROR_IO; + } + + /* bit of a hack: set num_configurations now because cache_active_config() + * calls usbi_get_config_index_by_value() which uses it */ + dev->num_configurations = dev_buf[DEVICE_DESC_LENGTH - 1]; + + if (device_configured) { + r = cache_active_config(dev, fd, active_config); + if (r < 0) { + close(fd); + free(dev_buf); + return r; + } + } + + close(fd); + priv->dev_descriptor = dev_buf; + return 0; +} + +static int enumerate_device(struct libusb_context *ctx, + struct discovered_devs **_discdevs, uint8_t busnum, uint8_t devaddr, + const char *sysfs_dir) +{ + struct discovered_devs *discdevs; + unsigned long session_id; + int need_unref = 0; + struct libusb_device *dev; + int r = 0; + + /* FIXME: session ID is not guaranteed unique as addresses can wrap and + * will be reused. instead we should add a simple sysfs attribute with + * a session ID. */ + session_id = busnum << 8 | devaddr; + usbi_dbg("busnum %d devaddr %d session_id %ld", busnum, devaddr, + session_id); + + dev = usbi_get_device_by_session_id(ctx, session_id); + if (dev) { + usbi_dbg("using existing device for %d/%d (session %ld)", + busnum, devaddr, session_id); + } else { + usbi_dbg("allocating new device for %d/%d (session %ld)", + busnum, devaddr, session_id); + dev = usbi_alloc_device(ctx, session_id); + if (!dev) + return LIBUSB_ERROR_NO_MEM; + need_unref = 1; + r = initialize_device(dev, busnum, devaddr, sysfs_dir); + if (r < 0) + goto out; + r = usbi_sanitize_device(dev); + if (r < 0) + goto out; + } + + discdevs = discovered_devs_append(*_discdevs, dev); + if (!discdevs) + r = LIBUSB_ERROR_NO_MEM; + else + *_discdevs = discdevs; + +out: + if (need_unref) + libusb_unref_device(dev); + return r; +} + +/* open a bus directory and adds all discovered devices to discdevs. on + * failure (non-zero return) the pre-existing discdevs should be destroyed + * (and devices freed). on success, the new discdevs pointer should be used + * as it may have been moved. */ +static int usbfs_scan_busdir(struct libusb_context *ctx, + struct discovered_devs **_discdevs, uint8_t busnum) +{ + DIR *dir; + char dirpath[PATH_MAX]; + struct dirent *entry; + struct discovered_devs *discdevs = *_discdevs; + int r = 0; + + snprintf(dirpath, PATH_MAX, "%s/%03d", usbfs_path, busnum); + usbi_dbg("%s", dirpath); + dir = opendir(dirpath); + if (!dir) { + usbi_err(ctx, "opendir '%s' failed, errno=%d", dirpath, errno); + /* FIXME: should handle valid race conditions like hub unplugged + * during directory iteration - this is not an error */ + return LIBUSB_ERROR_IO; + } + + while ((entry = readdir(dir))) { + int devaddr; + + if (entry->d_name[0] == '.') + continue; + + devaddr = atoi(entry->d_name); + if (devaddr == 0) { + usbi_dbg("unknown dir entry %s", entry->d_name); + continue; + } + + r = enumerate_device(ctx, &discdevs, busnum, (uint8_t) devaddr, NULL); + if (r < 0) + goto out; + } + + *_discdevs = discdevs; +out: + closedir(dir); + return r; +} + +static int usbfs_get_device_list(struct libusb_context *ctx, + struct discovered_devs **_discdevs) +{ + struct dirent *entry; + DIR *buses = opendir(usbfs_path); + struct discovered_devs *discdevs = *_discdevs; + int r = 0; + + if (!buses) { + usbi_err(ctx, "opendir buses failed errno=%d", errno); + return LIBUSB_ERROR_IO; + } + + while ((entry = readdir(buses))) { + struct discovered_devs *discdevs_new = discdevs; + int busnum; + + if (entry->d_name[0] == '.') + continue; + + busnum = atoi(entry->d_name); + if (busnum == 0) { + usbi_dbg("unknown dir entry %s", entry->d_name); + continue; + } + + r = usbfs_scan_busdir(ctx, &discdevs_new, busnum); + if (r < 0) + goto out; + discdevs = discdevs_new; + } + +out: + closedir(buses); + *_discdevs = discdevs; + return r; + +} + +static int sysfs_scan_device(struct libusb_context *ctx, + struct discovered_devs **_discdevs, const char *devname, + int *usbfs_fallback) +{ + int r; + FILE *fd; + char filename[PATH_MAX]; + int busnum; + int devaddr; + + usbi_dbg("scan %s", devname); + + /* determine descriptors presence ahead of time, we need to know this + * when we reach initialize_device */ + if (sysfs_has_descriptors == -1) { + struct stat statbuf; + + snprintf(filename, PATH_MAX, "%s/%s/descriptors", SYSFS_DEVICE_PATH, + devname); + r = stat(filename, &statbuf); + if (r == 0 && S_ISREG(statbuf.st_mode)) { + usbi_dbg("sysfs descriptors available"); + sysfs_has_descriptors = 1; + } else { + usbi_dbg("sysfs descriptors not available"); + sysfs_has_descriptors = 0; + } + } + + snprintf(filename, PATH_MAX, "%s/%s/busnum", SYSFS_DEVICE_PATH, devname); + fd = fopen(filename, "r"); + if (!fd) { + if (errno == ENOENT) { + usbi_dbg("busnum not found, cannot relate sysfs to usbfs, " + "falling back on pure usbfs"); + sysfs_can_relate_devices = 0; + *usbfs_fallback = 1; + return LIBUSB_ERROR_OTHER; + } + usbi_err(ctx, "open busnum failed, errno=%d", errno); + return LIBUSB_ERROR_IO; + } + + sysfs_can_relate_devices = 1; + + r = fscanf(fd, "%d", &busnum); + fclose(fd); + if (r != 1) { + usbi_err(ctx, "fscanf busnum returned %d, errno=%d", r, errno); + return LIBUSB_ERROR_IO; + } + + snprintf(filename, PATH_MAX, "%s/%s/devnum", SYSFS_DEVICE_PATH, devname); + fd = fopen(filename, "r"); + if (!fd) { + usbi_err(ctx, "open devnum failed, errno=%d", errno); + return LIBUSB_ERROR_IO; + } + + r = fscanf(fd, "%d", &devaddr); + fclose(fd); + if (r != 1) { + usbi_err(ctx, "fscanf devnum returned %d, errno=%d", r, errno); + return LIBUSB_ERROR_IO; + } + + usbi_dbg("bus=%d dev=%d", busnum, devaddr); + if (busnum > 255 || devaddr > 255) + return LIBUSB_ERROR_INVALID_PARAM; + + return enumerate_device(ctx, _discdevs, busnum & 0xff, devaddr & 0xff, + devname); +} + +static int sysfs_get_device_list(struct libusb_context *ctx, + struct discovered_devs **_discdevs, int *usbfs_fallback) +{ + struct discovered_devs *discdevs = *_discdevs; + DIR *devices = opendir(SYSFS_DEVICE_PATH); + struct dirent *entry; + int r = 0; + + if (!devices) { + usbi_err(ctx, "opendir devices failed errno=%d", errno); + return LIBUSB_ERROR_IO; + } + + while ((entry = readdir(devices))) { + struct discovered_devs *discdevs_new = discdevs; + + if ((!isdigit(entry->d_name[0]) && strncmp(entry->d_name, "usb", 3)) + || strchr(entry->d_name, ':')) + continue; + + r = sysfs_scan_device(ctx, &discdevs_new, entry->d_name, + usbfs_fallback); + if (r < 0) + goto out; + discdevs = discdevs_new; + } + +out: + closedir(devices); + *_discdevs = discdevs; + return r; +} + +static int op_get_device_list(struct libusb_context *ctx, + struct discovered_devs **_discdevs) +{ + /* we can retrieve device list and descriptors from sysfs or usbfs. + * sysfs is preferable, because if we use usbfs we end up resuming + * any autosuspended USB devices. however, sysfs is not available + * everywhere, so we need a usbfs fallback too. + * + * as described in the "sysfs vs usbfs" comment, sometimes we have + * sysfs but not enough information to relate sysfs devices to usbfs + * nodes. the usbfs_fallback variable is used to indicate that we should + * fall back on usbfs. + */ + if (sysfs_can_relate_devices != 0) { + int usbfs_fallback = 0; + int r = sysfs_get_device_list(ctx, _discdevs, &usbfs_fallback); + if (!usbfs_fallback) + return r; + } + + return usbfs_get_device_list(ctx, _discdevs); +} + +static int op_open(struct libusb_device_handle *handle) +{ + struct linux_device_handle_priv *hpriv = __device_handle_priv(handle); + char filename[PATH_MAX]; + + __get_usbfs_path(handle->dev, filename); + hpriv->fd = open(filename, O_RDWR); + if (hpriv->fd < 0) { + if (errno == EACCES) { + usbi_err(HANDLE_CTX(handle), "libusb couldn't open USB device %s: " + "Permission denied.", filename); + usbi_err(HANDLE_CTX(handle), + "libusb requires write access to USB device nodes."); + return LIBUSB_ERROR_ACCESS; + } else if (errno == ENOENT) { + return LIBUSB_ERROR_NO_DEVICE; + } else { + usbi_err(HANDLE_CTX(handle), + "open failed, code %d errno %d", hpriv->fd, errno); + return LIBUSB_ERROR_IO; + } + } + + return usbi_add_pollfd(HANDLE_CTX(handle), hpriv->fd, POLLOUT); +} + +static void op_close(struct libusb_device_handle *dev_handle) +{ + int fd = __device_handle_priv(dev_handle)->fd; + usbi_remove_pollfd(HANDLE_CTX(dev_handle), fd); + close(fd); +} + +static int op_get_configuration(struct libusb_device_handle *handle, + int *config) +{ + int r; + if (sysfs_can_relate_devices != 1) + return LIBUSB_ERROR_NOT_SUPPORTED; + + r = sysfs_get_active_config(handle->dev, config); + if (*config == -1) + *config = 0; + + return 0; +} + +static int op_set_configuration(struct libusb_device_handle *handle, int config) +{ + struct linux_device_priv *priv = __device_priv(handle->dev); + int fd = __device_handle_priv(handle)->fd; + int r = ioctl(fd, IOCTL_USBFS_SETCONFIG, &config); + if (r) { + if (errno == EINVAL) + return LIBUSB_ERROR_NOT_FOUND; + else if (errno == EBUSY) + return LIBUSB_ERROR_BUSY; + else if (errno == ENODEV) + return LIBUSB_ERROR_NO_DEVICE; + + usbi_err(HANDLE_CTX(handle), "failed, error %d errno %d", r, errno); + return LIBUSB_ERROR_OTHER; + } + + if (!sysfs_has_descriptors) { + /* update our cached active config descriptor */ + if (config == -1) { + if (priv->config_descriptor) { + free(priv->config_descriptor); + priv->config_descriptor = NULL; + } + } else { + r = cache_active_config(handle->dev, fd, config); + if (r < 0) + usbi_warn(HANDLE_CTX(handle), + "failed to update cached config descriptor, error %d", r); + } + } + + return 0; +} + +static int op_claim_interface(struct libusb_device_handle *handle, int iface) +{ + int fd = __device_handle_priv(handle)->fd; + int r = ioctl(fd, IOCTL_USBFS_CLAIMINTF, &iface); + if (r) { + if (errno == ENOENT) + return LIBUSB_ERROR_NOT_FOUND; + else if (errno == EBUSY) + return LIBUSB_ERROR_BUSY; + else if (errno == ENODEV) + return LIBUSB_ERROR_NO_DEVICE; + + usbi_err(HANDLE_CTX(handle), + "claim interface failed, error %d errno %d", r, errno); + return LIBUSB_ERROR_OTHER; + } + return 0; +} + +static int op_release_interface(struct libusb_device_handle *handle, int iface) +{ + int fd = __device_handle_priv(handle)->fd; + int r = ioctl(fd, IOCTL_USBFS_RELEASEINTF, &iface); + if (r) { + if (errno == ENODEV) + return LIBUSB_ERROR_NO_DEVICE; + + usbi_err(HANDLE_CTX(handle), + "release interface failed, error %d errno %d", r, errno); + return LIBUSB_ERROR_OTHER; + } + return 0; +} + +static int op_set_interface(struct libusb_device_handle *handle, int iface, + int altsetting) +{ + int fd = __device_handle_priv(handle)->fd; + struct usbfs_setinterface setintf; + int r; + + setintf.interface = iface; + setintf.altsetting = altsetting; + r = ioctl(fd, IOCTL_USBFS_SETINTF, &setintf); + if (r) { + if (errno == EINVAL) + return LIBUSB_ERROR_NOT_FOUND; + else if (errno == ENODEV) + return LIBUSB_ERROR_NO_DEVICE; + + usbi_err(HANDLE_CTX(handle), + "setintf failed error %d errno %d", r, errno); + return LIBUSB_ERROR_OTHER; + } + + return 0; +} + +static int op_clear_halt(struct libusb_device_handle *handle, + unsigned char endpoint) +{ + int fd = __device_handle_priv(handle)->fd; + unsigned int _endpoint = endpoint; + int r = ioctl(fd, IOCTL_USBFS_CLEAR_HALT, &_endpoint); + if (r) { + if (errno == ENOENT) + return LIBUSB_ERROR_NOT_FOUND; + else if (errno == ENODEV) + return LIBUSB_ERROR_NO_DEVICE; + + usbi_err(HANDLE_CTX(handle), + "clear_halt failed error %d errno %d", r, errno); + return LIBUSB_ERROR_OTHER; + } + + return 0; +} + +static int op_reset_device(struct libusb_device_handle *handle) +{ + int fd = __device_handle_priv(handle)->fd; + int r = ioctl(fd, IOCTL_USBFS_RESET, NULL); + if (r) { + if (errno == ENODEV) + return LIBUSB_ERROR_NOT_FOUND; + + usbi_err(HANDLE_CTX(handle), + "reset failed error %d errno %d", r, errno); + return LIBUSB_ERROR_OTHER; + } + + return 0; +} + +static int op_kernel_driver_active(struct libusb_device_handle *handle, + int interface) +{ + int fd = __device_handle_priv(handle)->fd; + struct usbfs_getdriver getdrv; + int r; + + getdrv.interface = interface; + r = ioctl(fd, IOCTL_USBFS_GETDRIVER, &getdrv); + if (r) { + if (errno == ENODATA) + return 0; + else if (errno == ENODEV) + return LIBUSB_ERROR_NO_DEVICE; + + usbi_err(HANDLE_CTX(handle), + "get driver failed error %d errno %d", r, errno); + return LIBUSB_ERROR_OTHER; + } + + return 1; +} + +static int op_detach_kernel_driver(struct libusb_device_handle *handle, + int interface) +{ + int fd = __device_handle_priv(handle)->fd; + struct usbfs_ioctl command; + int r; + + command.ifno = interface; + command.ioctl_code = IOCTL_USBFS_DISCONNECT; + command.data = NULL; + + r = ioctl(fd, IOCTL_USBFS_IOCTL, &command); + if (r) { + if (errno == ENODATA) + return LIBUSB_ERROR_NOT_FOUND; + else if (errno == EINVAL) + return LIBUSB_ERROR_INVALID_PARAM; + else if (errno == ENODEV) + return LIBUSB_ERROR_NO_DEVICE; + + usbi_err(HANDLE_CTX(handle), + "detach failed error %d errno %d", r, errno); + return LIBUSB_ERROR_OTHER; + } + + return 0; +} + +static int op_attach_kernel_driver(struct libusb_device_handle *handle, + int interface) +{ + int fd = __device_handle_priv(handle)->fd; + struct usbfs_ioctl command; + int r; + + command.ifno = interface; + command.ioctl_code = IOCTL_USBFS_CONNECT; + command.data = NULL; + + r = ioctl(fd, IOCTL_USBFS_IOCTL, &command); + if (r < 0) { + if (errno == ENODATA) + return LIBUSB_ERROR_NOT_FOUND; + else if (errno == EINVAL) + return LIBUSB_ERROR_INVALID_PARAM; + else if (errno == ENODEV) + return LIBUSB_ERROR_NO_DEVICE; + else if (errno == EBUSY) + return LIBUSB_ERROR_BUSY; + + usbi_err(HANDLE_CTX(handle), + "attach failed error %d errno %d", r, errno); + return LIBUSB_ERROR_OTHER; + } else if (r == 0) { + return LIBUSB_ERROR_NOT_FOUND; + } + + return 0; +} + +static void op_destroy_device(struct libusb_device *dev) +{ + struct linux_device_priv *priv = __device_priv(dev); + if (!sysfs_has_descriptors) { + if (priv->dev_descriptor) + free(priv->dev_descriptor); + if (priv->config_descriptor) + free(priv->config_descriptor); + } + if (priv->sysfs_dir) + free(priv->sysfs_dir); +} + +static void free_iso_urbs(struct linux_transfer_priv *tpriv) +{ + int i; + for (i = 0; i < tpriv->num_urbs; i++) { + struct usbfs_urb *urb = tpriv->iso_urbs[i]; + if (!urb) + break; + free(urb); + } + + free(tpriv->iso_urbs); + tpriv->iso_urbs = NULL; +} + +static int submit_bulk_transfer(struct usbi_transfer *itransfer, + unsigned char urb_type) +{ + struct libusb_transfer *transfer = + __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer); + struct linux_device_handle_priv *dpriv = + __device_handle_priv(transfer->dev_handle); + struct usbfs_urb *urbs; + int is_out = (transfer->endpoint & LIBUSB_ENDPOINT_DIR_MASK) + == LIBUSB_ENDPOINT_OUT; + int r; + int i; + size_t alloc_size; + + if (tpriv->urbs) + return LIBUSB_ERROR_BUSY; + + /* usbfs places a 16kb limit on bulk URBs. we divide up larger requests + * into smaller units to meet such restriction, then fire off all the + * units at once. it would be simpler if we just fired one unit at a time, + * but there is a big performance gain through doing it this way. */ + int num_urbs = transfer->length / MAX_BULK_BUFFER_LENGTH; + int last_urb_partial = 0; + + if (transfer->length == 0) { + num_urbs = 1; + } else if ((transfer->length % MAX_BULK_BUFFER_LENGTH) > 0) { + last_urb_partial = 1; + num_urbs++; + } + usbi_dbg("need %d urbs for new transfer with length %d", num_urbs, + transfer->length); + alloc_size = num_urbs * sizeof(struct usbfs_urb); + urbs = malloc(alloc_size); + if (!urbs) + return LIBUSB_ERROR_NO_MEM; + memset(urbs, 0, alloc_size); + tpriv->urbs = urbs; + tpriv->num_urbs = num_urbs; + tpriv->num_retired = 0; + tpriv->reap_action = NORMAL; + tpriv->reap_status = LIBUSB_TRANSFER_COMPLETED; + + for (i = 0; i < num_urbs; i++) { + struct usbfs_urb *urb = &urbs[i]; + urb->usercontext = itransfer; + urb->type = urb_type; + urb->endpoint = transfer->endpoint; + urb->buffer = transfer->buffer + (i * MAX_BULK_BUFFER_LENGTH); + if (supports_flag_bulk_continuation && !is_out) + urb->flags = USBFS_URB_SHORT_NOT_OK; + if (i == num_urbs - 1 && last_urb_partial) + urb->buffer_length = transfer->length % MAX_BULK_BUFFER_LENGTH; + else if (transfer->length == 0) + urb->buffer_length = 0; + else + urb->buffer_length = MAX_BULK_BUFFER_LENGTH; + + if (i > 0 && supports_flag_bulk_continuation) + urb->flags |= USBFS_URB_BULK_CONTINUATION; + + r = ioctl(dpriv->fd, IOCTL_USBFS_SUBMITURB, urb); + if (r < 0) { + int j; + + if (errno == ENODEV) { + r = LIBUSB_ERROR_NO_DEVICE; + } else { + usbi_err(TRANSFER_CTX(transfer), + "submiturb failed error %d errno=%d", r, errno); + r = LIBUSB_ERROR_IO; + } + + /* if the first URB submission fails, we can simply free up and + * return failure immediately. */ + if (i == 0) { + usbi_dbg("first URB failed, easy peasy"); + free(urbs); + tpriv->urbs = NULL; + return r; + } + + /* if it's not the first URB that failed, the situation is a bit + * tricky. we may need to discard all previous URBs. there are + * complications: + * - discarding is asynchronous - discarded urbs will be reaped + * later. the user must not have freed the transfer when the + * discarded URBs are reaped, otherwise libusb will be using + * freed memory. + * - the earlier URBs may have completed successfully and we do + * not want to throw away any data. + * - this URB failing may be no error; EREMOTEIO means that + * this transfer simply didn't need all the URBs we submitted + * so, we report that the transfer was submitted successfully and + * in case of error we discard all previous URBs. later when + * the final reap completes we can report error to the user, + * or success if an earlier URB was completed successfully. + */ + tpriv->reap_action = EREMOTEIO == errno ? COMPLETED_EARLY : SUBMIT_FAILED; + + /* The URBs we haven't submitted yet we count as already + * retired. */ + tpriv->num_retired += num_urbs - i; + + /* If we completed short then don't try to discard. */ + if (COMPLETED_EARLY == tpriv->reap_action) + return 0; + + for (j = 0; j < i; j++) { + int tmp = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, &urbs[j]); + if (tmp && errno != EINVAL) + usbi_warn(TRANSFER_CTX(transfer), + "unrecognised discard errno %d", errno); + } + + usbi_dbg("reporting successful submission but waiting for %d " + "discards before reporting error", i); + return 0; + } + } + + return 0; +} + +static int submit_iso_transfer(struct usbi_transfer *itransfer) +{ + struct libusb_transfer *transfer = + __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer); + struct linux_device_handle_priv *dpriv = + __device_handle_priv(transfer->dev_handle); + struct usbfs_urb **urbs; + size_t alloc_size; + int num_packets = transfer->num_iso_packets; + int i; + int this_urb_len = 0; + int num_urbs = 1; + int packet_offset = 0; + unsigned int packet_len; + unsigned char *urb_buffer = transfer->buffer; + + if (tpriv->iso_urbs) + return LIBUSB_ERROR_BUSY; + + /* usbfs places a 32kb limit on iso URBs. we divide up larger requests + * into smaller units to meet such restriction, then fire off all the + * units at once. it would be simpler if we just fired one unit at a time, + * but there is a big performance gain through doing it this way. */ + + /* calculate how many URBs we need */ + for (i = 0; i < num_packets; i++) { + int space_remaining = MAX_ISO_BUFFER_LENGTH - this_urb_len; + packet_len = transfer->iso_packet_desc[i].length; + + if (packet_len > space_remaining) { + num_urbs++; + this_urb_len = packet_len; + } else { + this_urb_len += packet_len; + } + } + usbi_dbg("need %d 32k URBs for transfer", num_urbs); + + alloc_size = num_urbs * sizeof(*urbs); + urbs = malloc(alloc_size); + if (!urbs) + return LIBUSB_ERROR_NO_MEM; + memset(urbs, 0, alloc_size); + + tpriv->iso_urbs = urbs; + tpriv->num_urbs = num_urbs; + tpriv->num_retired = 0; + tpriv->reap_action = NORMAL; + tpriv->iso_packet_offset = 0; + + /* allocate + initialize each URB with the correct number of packets */ + for (i = 0; i < num_urbs; i++) { + struct usbfs_urb *urb; + int space_remaining_in_urb = MAX_ISO_BUFFER_LENGTH; + int urb_packet_offset = 0; + unsigned char *urb_buffer_orig = urb_buffer; + int j; + int k; + + /* swallow up all the packets we can fit into this URB */ + while (packet_offset < transfer->num_iso_packets) { + packet_len = transfer->iso_packet_desc[packet_offset].length; + if (packet_len <= space_remaining_in_urb) { + /* throw it in */ + urb_packet_offset++; + packet_offset++; + space_remaining_in_urb -= packet_len; + urb_buffer += packet_len; + } else { + /* it can't fit, save it for the next URB */ + break; + } + } + + alloc_size = sizeof(*urb) + + (urb_packet_offset * sizeof(struct usbfs_iso_packet_desc)); + urb = malloc(alloc_size); + if (!urb) { + free_iso_urbs(tpriv); + return LIBUSB_ERROR_NO_MEM; + } + memset(urb, 0, alloc_size); + urbs[i] = urb; + + /* populate packet lengths */ + for (j = 0, k = packet_offset - urb_packet_offset; + k < packet_offset; k++, j++) { + packet_len = transfer->iso_packet_desc[k].length; + urb->iso_frame_desc[j].length = packet_len; + } + + urb->usercontext = itransfer; + urb->type = USBFS_URB_TYPE_ISO; + /* FIXME: interface for non-ASAP data? */ + urb->flags = USBFS_URB_ISO_ASAP; + urb->endpoint = transfer->endpoint; + urb->number_of_packets = urb_packet_offset; + urb->buffer = urb_buffer_orig; + } + + /* submit URBs */ + for (i = 0; i < num_urbs; i++) { + int r = ioctl(dpriv->fd, IOCTL_USBFS_SUBMITURB, urbs[i]); + if (r < 0) { + int j; + + if (errno == ENODEV) { + r = LIBUSB_ERROR_NO_DEVICE; + } else { + usbi_err(TRANSFER_CTX(transfer), + "submiturb failed error %d errno=%d", r, errno); + r = LIBUSB_ERROR_IO; + } + + /* if the first URB submission fails, we can simply free up and + * return failure immediately. */ + if (i == 0) { + usbi_dbg("first URB failed, easy peasy"); + free_iso_urbs(tpriv); + return r; + } + + /* if it's not the first URB that failed, the situation is a bit + * tricky. we must discard all previous URBs. there are + * complications: + * - discarding is asynchronous - discarded urbs will be reaped + * later. the user must not have freed the transfer when the + * discarded URBs are reaped, otherwise libusb will be using + * freed memory. + * - the earlier URBs may have completed successfully and we do + * not want to throw away any data. + * so, in this case we discard all the previous URBs BUT we report + * that the transfer was submitted successfully. then later when + * the final discard completes we can report error to the user. + */ + tpriv->reap_action = SUBMIT_FAILED; + + /* The URBs we haven't submitted yet we count as already + * retired. */ + tpriv->num_retired = num_urbs - i; + for (j = 0; j < i; j++) { + int tmp = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, urbs[j]); + if (tmp && errno != EINVAL) + usbi_warn(TRANSFER_CTX(transfer), + "unrecognised discard errno %d", errno); + } + + usbi_dbg("reporting successful submission but waiting for %d " + "discards before reporting error", i); + return 0; + } + } + + return 0; +} + +static int submit_control_transfer(struct usbi_transfer *itransfer) +{ + struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer); + struct libusb_transfer *transfer = + __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + struct linux_device_handle_priv *dpriv = + __device_handle_priv(transfer->dev_handle); + struct usbfs_urb *urb; + int r; + + if (tpriv->urbs) + return LIBUSB_ERROR_BUSY; + + if (transfer->length - LIBUSB_CONTROL_SETUP_SIZE > MAX_CTRL_BUFFER_LENGTH) + return LIBUSB_ERROR_INVALID_PARAM; + + urb = malloc(sizeof(struct usbfs_urb)); + if (!urb) + return LIBUSB_ERROR_NO_MEM; + memset(urb, 0, sizeof(struct usbfs_urb)); + tpriv->urbs = urb; + tpriv->reap_action = NORMAL; + + urb->usercontext = itransfer; + urb->type = USBFS_URB_TYPE_CONTROL; + urb->endpoint = transfer->endpoint; + urb->buffer = transfer->buffer; + urb->buffer_length = transfer->length; + + r = ioctl(dpriv->fd, IOCTL_USBFS_SUBMITURB, urb); + if (r < 0) { + free(urb); + tpriv->urbs = NULL; + if (errno == ENODEV) + return LIBUSB_ERROR_NO_DEVICE; + + usbi_err(TRANSFER_CTX(transfer), + "submiturb failed error %d errno=%d", r, errno); + return LIBUSB_ERROR_IO; + } + return 0; +} + +static int op_submit_transfer(struct usbi_transfer *itransfer) +{ + struct libusb_transfer *transfer = + __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + + switch (transfer->type) { + case LIBUSB_TRANSFER_TYPE_CONTROL: + return submit_control_transfer(itransfer); + case LIBUSB_TRANSFER_TYPE_BULK: + return submit_bulk_transfer(itransfer, USBFS_URB_TYPE_BULK); + case LIBUSB_TRANSFER_TYPE_INTERRUPT: + return submit_bulk_transfer(itransfer, USBFS_URB_TYPE_INTERRUPT); + case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS: + return submit_iso_transfer(itransfer); + default: + usbi_err(TRANSFER_CTX(transfer), + "unknown endpoint type %d", transfer->type); + return LIBUSB_ERROR_INVALID_PARAM; + } +} + +static int cancel_control_transfer(struct usbi_transfer *itransfer) +{ + struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer); + struct libusb_transfer *transfer = + __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + struct linux_device_handle_priv *dpriv = + __device_handle_priv(transfer->dev_handle); + int r; + + if (!tpriv->urbs) + return LIBUSB_ERROR_NOT_FOUND; + + tpriv->reap_action = CANCELLED; + r = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, tpriv->urbs); + if(r) { + if (errno == EINVAL) { + usbi_dbg("URB not found --> assuming ready to be reaped"); + return 0; + } else { + usbi_err(TRANSFER_CTX(transfer), + "unrecognised DISCARD code %d", errno); + return LIBUSB_ERROR_OTHER; + } + } + + return 0; +} + +static int cancel_bulk_transfer(struct usbi_transfer *itransfer) +{ + struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer); + struct libusb_transfer *transfer = + __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + struct linux_device_handle_priv *dpriv = + __device_handle_priv(transfer->dev_handle); + int i; + + if (!tpriv->urbs) + return LIBUSB_ERROR_NOT_FOUND; + + if (tpriv->reap_action != ERROR) + tpriv->reap_action = CANCELLED; + + for (i = 0; i < tpriv->num_urbs; i++) { + int tmp = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, &tpriv->urbs[i]); + if (tmp && errno != EINVAL) + usbi_warn(TRANSFER_CTX(transfer), + "unrecognised discard errno %d", errno); + } + return 0; +} + +static int cancel_iso_transfer(struct usbi_transfer *itransfer) +{ + struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer); + struct libusb_transfer *transfer = + __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + struct linux_device_handle_priv *dpriv = + __device_handle_priv(transfer->dev_handle); + int i; + + if (!tpriv->iso_urbs) + return LIBUSB_ERROR_NOT_FOUND; + + tpriv->reap_action = CANCELLED; + for (i = 0; i < tpriv->num_urbs; i++) { + int tmp = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, tpriv->iso_urbs[i]); + if (tmp && errno != EINVAL) + usbi_warn(TRANSFER_CTX(transfer), + "unrecognised discard errno %d", errno); + } + return 0; +} + +static int op_cancel_transfer(struct usbi_transfer *itransfer) +{ + struct libusb_transfer *transfer = + __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + + switch (transfer->type) { + case LIBUSB_TRANSFER_TYPE_CONTROL: + return cancel_control_transfer(itransfer); + case LIBUSB_TRANSFER_TYPE_BULK: + case LIBUSB_TRANSFER_TYPE_INTERRUPT: + return cancel_bulk_transfer(itransfer); + case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS: + return cancel_iso_transfer(itransfer); + default: + usbi_err(TRANSFER_CTX(transfer), + "unknown endpoint type %d", transfer->type); + return LIBUSB_ERROR_INVALID_PARAM; + } +} + +static void op_clear_transfer_priv(struct usbi_transfer *itransfer) +{ + struct libusb_transfer *transfer = + __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer); + + switch (transfer->type) { + case LIBUSB_TRANSFER_TYPE_CONTROL: + case LIBUSB_TRANSFER_TYPE_BULK: + case LIBUSB_TRANSFER_TYPE_INTERRUPT: + free(tpriv->urbs); + tpriv->urbs = NULL; + break; + case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS: + free_iso_urbs(tpriv); + break; + default: + usbi_err(TRANSFER_CTX(transfer), + "unknown endpoint type %d", transfer->type); + } +} + +static int handle_bulk_completion(struct usbi_transfer *itransfer, + struct usbfs_urb *urb) +{ + struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer); + struct libusb_transfer *transfer = __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + struct linux_device_handle_priv *dpriv = __device_handle_priv(transfer->dev_handle); + int urb_idx = urb - tpriv->urbs; + + usbi_mutex_lock(&itransfer->lock); + usbi_dbg("handling completion status %d of bulk urb %d/%d", urb->status, + urb_idx + 1, tpriv->num_urbs); + + tpriv->num_retired++; + + if (tpriv->reap_action != NORMAL) { + /* cancelled, submit_fail, or completed early */ + usbi_dbg("abnormal reap: urb status %d", urb->status); + + /* even though we're in the process of cancelling, it's possible that + * we may receive some data in these URBs that we don't want to lose. + * examples: + * 1. while the kernel is cancelling all the packets that make up an + * URB, a few of them might complete. so we get back a successful + * cancellation *and* some data. + * 2. we receive a short URB which marks the early completion condition, + * so we start cancelling the remaining URBs. however, we're too + * slow and another URB completes (or at least completes partially). + * + * When this happens, our objectives are not to lose any "surplus" data, + * and also to stick it at the end of the previously-received data + * (closing any holes), so that libusb reports the total amount of + * transferred data and presents it in a contiguous chunk. + */ + if (urb->actual_length > 0) { + unsigned char *target = transfer->buffer + itransfer->transferred; + usbi_dbg("received %d bytes of surplus data", urb->actual_length); + if (urb->buffer != target) { + usbi_dbg("moving surplus data from offset %d to offset %d", + (unsigned char *) urb->buffer - transfer->buffer, + target - transfer->buffer); + memmove(target, urb->buffer, urb->actual_length); + } + itransfer->transferred += urb->actual_length; + } + + if (tpriv->num_retired == tpriv->num_urbs) { + usbi_dbg("abnormal reap: last URB handled, reporting"); + if (tpriv->reap_action != COMPLETED_EARLY && + tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED) + tpriv->reap_status = LIBUSB_TRANSFER_ERROR; + goto completed; + } + goto out_unlock; + } + + if (urb->status == 0 || urb->status == -EREMOTEIO || + (urb->status == -EOVERFLOW && urb->actual_length > 0)) + itransfer->transferred += urb->actual_length; + + + switch (urb->status) { + case 0: + break; + case -EREMOTEIO: /* short transfer */ + break; + case -EPIPE: + usbi_dbg("detected endpoint stall"); + if (tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED) + tpriv->reap_status = LIBUSB_TRANSFER_STALL; + goto cancel_remaining; + case -EOVERFLOW: + /* overflow can only ever occur in the last urb */ + usbi_dbg("overflow, actual_length=%d", urb->actual_length); + if (tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED) + tpriv->reap_status = LIBUSB_TRANSFER_OVERFLOW; + goto completed; + case -ETIME: + case -EPROTO: + case -EILSEQ: + /* These can happen on *any* urb of a multi-urb transfer, so + * save a status and tear down rest of the transfer */ + usbi_dbg("low level error %d", urb->status); + tpriv->reap_action = ERROR; + if (tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED) + tpriv->reap_status = LIBUSB_TRANSFER_ERROR; + goto cancel_remaining; + default: + usbi_warn(ITRANSFER_CTX(itransfer), + "unrecognised urb status %d", urb->status); + if (tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED) + tpriv->reap_status = LIBUSB_TRANSFER_ERROR; + goto cancel_remaining; + } + + /* if we're the last urb or we got less data than requested then we're + * done */ + if (urb_idx == tpriv->num_urbs - 1) { + usbi_dbg("last URB in transfer --> complete!"); + goto completed; + } else if (urb->actual_length < urb->buffer_length) { + usbi_dbg("short transfer %d/%d --> complete!", + urb->actual_length, urb->buffer_length); + if (tpriv->reap_action == NORMAL) + tpriv->reap_action = COMPLETED_EARLY; + } else + goto out_unlock; + +cancel_remaining: + if (tpriv->num_retired == tpriv->num_urbs) /* nothing to cancel */ + goto completed; + + /* cancel remaining urbs and wait for their completion before + * reporting results */ + while (++urb_idx < tpriv->num_urbs) { + /* remaining URBs with continuation flag are + * automatically cancelled by the kernel */ + if (tpriv->urbs[urb_idx].flags & USBFS_URB_BULK_CONTINUATION) + continue; + int tmp = ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, &tpriv->urbs[urb_idx]); + if (tmp && errno != EINVAL) + usbi_warn(TRANSFER_CTX(transfer), + "unrecognised discard errno %d", errno); + } + +out_unlock: + usbi_mutex_unlock(&itransfer->lock); + return 0; + +completed: + free(tpriv->urbs); + tpriv->urbs = NULL; + usbi_mutex_unlock(&itransfer->lock); + return CANCELLED == tpriv->reap_action ? + usbi_handle_transfer_cancellation(itransfer) : + usbi_handle_transfer_completion(itransfer, tpriv->reap_status); +} + +static int handle_iso_completion(struct usbi_transfer *itransfer, + struct usbfs_urb *urb) +{ + struct libusb_transfer *transfer = + __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer); + int num_urbs = tpriv->num_urbs; + int urb_idx = 0; + int i; + + usbi_mutex_lock(&itransfer->lock); + for (i = 0; i < num_urbs; i++) { + if (urb == tpriv->iso_urbs[i]) { + urb_idx = i + 1; + break; + } + } + if (urb_idx == 0) { + usbi_err(TRANSFER_CTX(transfer), "could not locate urb!"); + usbi_mutex_unlock(&itransfer->lock); + return LIBUSB_ERROR_NOT_FOUND; + } + + usbi_dbg("handling completion status %d of iso urb %d/%d", urb->status, + urb_idx, num_urbs); + + if (urb->status == 0) { + /* copy isochronous results back in */ + + for (i = 0; i < urb->number_of_packets; i++) { + struct usbfs_iso_packet_desc *urb_desc = &urb->iso_frame_desc[i]; + struct libusb_iso_packet_descriptor *lib_desc = + &transfer->iso_packet_desc[tpriv->iso_packet_offset++]; + lib_desc->status = urb_desc->status; + lib_desc->actual_length = urb_desc->actual_length; + } + } + + tpriv->num_retired++; + + if (tpriv->reap_action != NORMAL) { /* cancelled or submit_fail */ + usbi_dbg("CANCEL: urb status %d", urb->status); + + if (tpriv->num_retired == num_urbs) { + usbi_dbg("CANCEL: last URB handled, reporting"); + free_iso_urbs(tpriv); + if (tpriv->reap_action == CANCELLED) { + usbi_mutex_unlock(&itransfer->lock); + return usbi_handle_transfer_cancellation(itransfer); + } else { + usbi_mutex_unlock(&itransfer->lock); + return usbi_handle_transfer_completion(itransfer, + LIBUSB_TRANSFER_ERROR); + } + } + goto out; + } + + switch (urb->status) { + case 0: + break; + case -ETIME: + case -EPROTO: + case -EILSEQ: + usbi_dbg("low-level USB error %d", urb->status); + break; + default: + usbi_warn(TRANSFER_CTX(transfer), + "unrecognised urb status %d", urb->status); + break; + } + + /* if we're the last urb or we got less data than requested then we're + * done */ + if (urb_idx == num_urbs) { + usbi_dbg("last URB in transfer --> complete!"); + free_iso_urbs(tpriv); + usbi_mutex_unlock(&itransfer->lock); + return usbi_handle_transfer_completion(itransfer, LIBUSB_TRANSFER_COMPLETED); + } + +out: + usbi_mutex_unlock(&itransfer->lock); + return 0; +} + +static int handle_control_completion(struct usbi_transfer *itransfer, + struct usbfs_urb *urb) +{ + struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer); + int status; + + usbi_mutex_lock(&itransfer->lock); + usbi_dbg("handling completion status %d", urb->status); + + if (urb->status == 0) + itransfer->transferred += urb->actual_length; + + if (tpriv->reap_action == CANCELLED) { + if (urb->status != 0 && urb->status != -ENOENT) + usbi_warn(ITRANSFER_CTX(itransfer), + "cancel: unrecognised urb status %d", urb->status); + free(tpriv->urbs); + tpriv->urbs = NULL; + usbi_mutex_unlock(&itransfer->lock); + return usbi_handle_transfer_cancellation(itransfer); + } + + switch (urb->status) { + case 0: + itransfer->transferred = urb->actual_length; + status = LIBUSB_TRANSFER_COMPLETED; + break; + case -EPIPE: + usbi_dbg("unsupported control request"); + status = LIBUSB_TRANSFER_STALL; + break; + case -ETIME: + case -EPROTO: + case -EILSEQ: + usbi_dbg("low-level bus error occurred"); + status = LIBUSB_TRANSFER_ERROR; + break; + default: + usbi_warn(ITRANSFER_CTX(itransfer), + "unrecognised urb status %d", urb->status); + status = LIBUSB_TRANSFER_ERROR; + break; + } + + free(tpriv->urbs); + tpriv->urbs = NULL; + usbi_mutex_unlock(&itransfer->lock); + return usbi_handle_transfer_completion(itransfer, status); +} + +static int reap_for_handle(struct libusb_device_handle *handle) +{ + struct linux_device_handle_priv *hpriv = __device_handle_priv(handle); + int r; + struct usbfs_urb *urb; + struct usbi_transfer *itransfer; + struct libusb_transfer *transfer; + + r = ioctl(hpriv->fd, IOCTL_USBFS_REAPURBNDELAY, &urb); + if (r == -1 && errno == EAGAIN) + return 1; + if (r < 0) { + if (errno == ENODEV) + return LIBUSB_ERROR_NO_DEVICE; + + usbi_err(HANDLE_CTX(handle), "reap failed error %d errno=%d", + r, errno); + return LIBUSB_ERROR_IO; + } + + itransfer = urb->usercontext; + transfer = __USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); + + usbi_dbg("urb type=%d status=%d transferred=%d", urb->type, urb->status, + urb->actual_length); + + switch (transfer->type) { + case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS: + return handle_iso_completion(itransfer, urb); + case LIBUSB_TRANSFER_TYPE_BULK: + case LIBUSB_TRANSFER_TYPE_INTERRUPT: + return handle_bulk_completion(itransfer, urb); + case LIBUSB_TRANSFER_TYPE_CONTROL: + return handle_control_completion(itransfer, urb); + default: + usbi_err(HANDLE_CTX(handle), "unrecognised endpoint type %x", + transfer->type); + return LIBUSB_ERROR_OTHER; + } +} + +static int op_handle_events(struct libusb_context *ctx, + struct pollfd *fds, nfds_t nfds, int num_ready) +{ + int r; + int i = 0; + + usbi_mutex_lock(&ctx->open_devs_lock); + for (i = 0; i < nfds && num_ready > 0; i++) { + struct pollfd *pollfd = &fds[i]; + struct libusb_device_handle *handle; + struct linux_device_handle_priv *hpriv = NULL; + + if (!pollfd->revents) + continue; + + num_ready--; + list_for_each_entry(handle, &ctx->open_devs, list, struct libusb_device_handle) { + hpriv = __device_handle_priv(handle); + if (hpriv->fd == pollfd->fd) + break; + } + + if (pollfd->revents & POLLERR) { + usbi_remove_pollfd(HANDLE_CTX(handle), hpriv->fd); + usbi_handle_disconnect(handle); + continue; + } + + r = reap_for_handle(handle); + if (r == 1 || r == LIBUSB_ERROR_NO_DEVICE) + continue; + else if (r < 0) + goto out; + } + + r = 0; +out: + usbi_mutex_unlock(&ctx->open_devs_lock); + return r; +} + +static int op_clock_gettime(int clk_id, struct timespec *tp) +{ + switch (clk_id) { + case USBI_CLOCK_MONOTONIC: + return clock_gettime(monotonic_clkid, tp); + case USBI_CLOCK_REALTIME: + return clock_gettime(CLOCK_REALTIME, tp); + default: + return LIBUSB_ERROR_INVALID_PARAM; + } +} + +#ifdef USBI_TIMERFD_AVAILABLE +static clockid_t op_get_timerfd_clockid(void) +{ + return monotonic_clkid; + +} +#endif + +const struct usbi_os_backend linux_usbfs_backend = { + .name = "Linux usbfs", + .init = op_init, + .exit = NULL, + .get_device_list = op_get_device_list, + .get_device_descriptor = op_get_device_descriptor, + .get_active_config_descriptor = op_get_active_config_descriptor, + .get_config_descriptor = op_get_config_descriptor, + + .open = op_open, + .close = op_close, + .get_configuration = op_get_configuration, + .set_configuration = op_set_configuration, + .claim_interface = op_claim_interface, + .release_interface = op_release_interface, + + .set_interface_altsetting = op_set_interface, + .clear_halt = op_clear_halt, + .reset_device = op_reset_device, + + .kernel_driver_active = op_kernel_driver_active, + .detach_kernel_driver = op_detach_kernel_driver, + .attach_kernel_driver = op_attach_kernel_driver, + + .destroy_device = op_destroy_device, + + .submit_transfer = op_submit_transfer, + .cancel_transfer = op_cancel_transfer, + .clear_transfer_priv = op_clear_transfer_priv, + + .handle_events = op_handle_events, + + .clock_gettime = op_clock_gettime, + +#ifdef USBI_TIMERFD_AVAILABLE + .get_timerfd_clockid = op_get_timerfd_clockid, +#endif + + .device_priv_size = sizeof(struct linux_device_priv), + .device_handle_priv_size = sizeof(struct linux_device_handle_priv), + .transfer_priv_size = sizeof(struct linux_transfer_priv), + .add_iso_packet_size = 0, +}; + -- cgit v1.1-32-gdbae