diff options
Diffstat (limited to 'include/libimobiledevice')
| -rw-r--r-- | include/libimobiledevice/property_list_service.h | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/include/libimobiledevice/property_list_service.h b/include/libimobiledevice/property_list_service.h new file mode 100644 index 0000000..4a004ba --- /dev/null +++ b/include/libimobiledevice/property_list_service.h @@ -0,0 +1,170 @@ +/* + * @file libimobiledevice/property_list_service.h + * @brief Definitions for the PropertyList service + * + * Copyright (c) 2010 Nikias Bassen, All Rights Reserved. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef IPROPERTY_LIST_SERVICE_H +#define IPROPERTY_LIST_SERVICE_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include <libimobiledevice/lockdown.h> + +/* Error Codes */ +/*@{*/ +#define PROPERTY_LIST_SERVICE_E_SUCCESS 0 +#define PROPERTY_LIST_SERVICE_E_INVALID_ARG -1 +#define PROPERTY_LIST_SERVICE_E_PLIST_ERROR -2 +#define PROPERTY_LIST_SERVICE_E_MUX_ERROR -3 +#define PROPERTY_LIST_SERVICE_E_SSL_ERROR -4 +#define PROPERTY_LIST_SERVICE_E_RECEIVE_TIMEOUT -5 +#define PROPERTY_LIST_SERVICE_E_UNKNOWN_ERROR -256 +/*@}*/ + +/** Represents an error code */ +typedef int16_t property_list_service_error_t; + +typedef struct property_list_service_client_private property_list_service_private; +typedef property_list_service_private* property_list_service_client_t; /**< The client handle. */ + +/* Interface */ + +/** + * Creates a new property list service for the specified port. + * + * @param device The device to connect to. + * @param service The service descriptor returned by lockdownd_start_service. + * @param client Pointer that will be set to a newly allocated + * property_list_service_client_t upon successful return. + * + * @return PROPERTY_LIST_SERVICE_E_SUCCESS on success, + * PROPERTY_LIST_SERVICE_E_INVALID_ARG when one of the arguments is invalid, + * or PROPERTY_LIST_SERVICE_E_MUX_ERROR when connecting to the device failed. + */ +property_list_service_error_t property_list_service_client_new(idevice_t device, lockdownd_service_descriptor_t service, property_list_service_client_t *client); + +/** + * Frees a PropertyList service. + * + * @param client The property list service to free. + * + * @return PROPERTY_LIST_SERVICE_E_SUCCESS on success, + * PROPERTY_LIST_SERVICE_E_INVALID_ARG when client is invalid, or a + * PROPERTY_LIST_SERVICE_E_UNKNOWN_ERROR when another error occured. + */ +property_list_service_error_t property_list_service_client_free(property_list_service_client_t client); + +/** + * Sends an XML plist. + * + * @param client The property list service client to use for sending. + * @param plist plist to send + * + * @return PROPERTY_LIST_SERVICE_E_SUCCESS on success, + * PROPERTY_LIST_SERVICE_E_INVALID_ARG when client or plist is NULL, + * PROPERTY_LIST_SERVICE_E_PLIST_ERROR when dict is not a valid plist, + * or PROPERTY_LIST_SERVICE_E_UNKNOWN_ERROR when an unspecified error occurs. + */ +property_list_service_error_t property_list_service_send_xml_plist(property_list_service_client_t client, plist_t plist); + +/** + * Sends a binary plist. + * + * @param client The property list service client to use for sending. + * @param plist plist to send + * + * @return PROPERTY_LIST_SERVICE_E_SUCCESS on success, + * PROPERTY_LIST_SERVICE_E_INVALID_ARG when client or plist is NULL, + * PROPERTY_LIST_SERVICE_E_PLIST_ERROR when dict is not a valid plist, + * or PROPERTY_LIST_SERVICE_E_UNKNOWN_ERROR when an unspecified error occurs. + */ +property_list_service_error_t property_list_service_send_binary_plist(property_list_service_client_t client, plist_t plist); + +/** + * Receives a plist using the given property list service client with specified + * timeout. + * Binary or XML plists are automatically handled. + * + * @param client The property list service client to use for receiving + * @param plist pointer to a plist_t that will point to the received plist + * upon successful return + * @param timeout Maximum time in milliseconds to wait for data. + * + * @return PROPERTY_LIST_SERVICE_E_SUCCESS on success, + * PROPERTY_LIST_SERVICE_E_INVALID_ARG when connection or *plist is NULL, + * PROPERTY_LIST_SERVICE_E_PLIST_ERROR when the received data cannot be + * converted to a plist, PROPERTY_LIST_SERVICE_E_MUX_ERROR when a + * communication error occurs, or PROPERTY_LIST_SERVICE_E_UNKNOWN_ERROR when + * an unspecified error occurs. + */ +property_list_service_error_t property_list_service_receive_plist_with_timeout(property_list_service_client_t client, plist_t *plist, unsigned int timeout); + +/** + * Receives a plist using the given property list service client. + * Binary or XML plists are automatically handled. + * + * This function is like property_list_service_receive_plist_with_timeout + * using a timeout of 10 seconds. + * @see property_list_service_receive_plist_with_timeout + * + * @param client The property list service client to use for receiving + * @param plist pointer to a plist_t that will point to the received plist + * upon successful return + * + * @return PROPERTY_LIST_SERVICE_E_SUCCESS on success, + * PROPERTY_LIST_SERVICE_E_INVALID_ARG when client or *plist is NULL, + * PROPERTY_LIST_SERVICE_E_PLIST_ERROR when the received data cannot be + * converted to a plist, PROPERTY_LIST_SERVICE_E_MUX_ERROR when a + * communication error occurs, or PROPERTY_LIST_SERVICE_E_UNKNOWN_ERROR when + * an unspecified error occurs. + */ +property_list_service_error_t property_list_service_receive_plist(property_list_service_client_t client, plist_t *plist); + +/** + * Enable SSL for the given property list service client. + * + * @param client The connected property list service client for which SSL + * should be enabled. + * + * @return PROPERTY_LIST_SERVICE_E_SUCCESS on success, + * PROPERTY_LIST_SERVICE_E_INVALID_ARG if client or client->connection is + * NULL, PROPERTY_LIST_SERVICE_E_SSL_ERROR when SSL could not be enabled, + * or PROPERTY_LIST_SERVICE_E_UNKNOWN_ERROR otherwise. + */ +property_list_service_error_t property_list_service_enable_ssl(property_list_service_client_t client); + +/** + * Disable SSL for the given property list service client. + * + * @param client The connected property list service client for which SSL + * should be disabled. + * + * @return PROPERTY_LIST_SERVICE_E_SUCCESS on success, + * PROPERTY_LIST_SERVICE_E_INVALID_ARG if client or client->connection is + * NULL, or PROPERTY_LIST_SERVICE_E_UNKNOWN_ERROR otherwise. + */ +property_list_service_error_t property_list_service_disable_ssl(property_list_service_client_t client); + +#ifdef __cplusplus +} +#endif + +#endif |