diff options
Diffstat (limited to 'src/afc.c')
| -rw-r--r-- | src/afc.c | 212 |
1 files changed, 0 insertions, 212 deletions
@@ -95,18 +95,6 @@ afc_error_t afc_client_new_with_service_client(service_client_t service_client, return AFC_E_SUCCESS; } -/** - * Makes a connection to the AFC service on the device. - * - * @param device The device to connect to. - * @param service The service descriptor returned by lockdownd_start_service. - * @param client Pointer that will be set to a newly allocated afc_client_t - * upon successful return. - * - * @return AFC_E_SUCCESS on success, AFC_E_INVALID_ARG if device or service is - * invalid, AFC_E_MUX_ERROR if the connection cannot be established, - * or AFC_E_NO_MEM if there is a memory allocation problem. - */ afc_error_t afc_client_new(idevice_t device, lockdownd_service_descriptor_t service, afc_client_t * client) { if (!device || !service || service->port == 0) @@ -126,19 +114,6 @@ afc_error_t afc_client_new(idevice_t device, lockdownd_service_descriptor_t serv return err; } -/** - * Starts a new AFC service on the specified device and connects to it. - * - * @param device The device to connect to. - * @param client Pointer that will point to a newly allocated - * afc_client_t upon successful return. Must be freed using - * afc_client_free() after use. - * @param label The label to use for communication. Usually the program name. - * Pass NULL to disable sending the label in requests to lockdownd. - * - * @return AFC_E_SUCCESS on success, or an AFC_E_* error - * code otherwise. - */ afc_error_t afc_client_start_service(idevice_t device, afc_client_t * client, const char* label) { afc_error_t err = AFC_E_UNKNOWN_ERROR; @@ -146,12 +121,6 @@ afc_error_t afc_client_start_service(idevice_t device, afc_client_t * client, co return err; } -/** - * Frees up an AFC client. If the connection was created by the - * client itself, the connection will be closed. - * - * @param client The client to free. - */ afc_error_t afc_client_free(afc_client_t client) { if (!client || !client->afc_packet) @@ -432,16 +401,6 @@ static char **make_strings_list(char *tokens, uint32_t length) return list; } -/** - * Gets a directory listing of the directory requested. - * - * @param client The client to get a directory listing from. - * @param dir The directory to list. (must be a fully-qualified path) - * @param list A char list of files in that directory, terminated by an empty - * string or NULL if there was an error. - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_read_directory(afc_client_t client, const char *dir, char ***list) { uint32_t bytes = 0; @@ -478,17 +437,6 @@ afc_error_t afc_read_directory(afc_client_t client, const char *dir, char ***lis return ret; } -/** - * Get device information for a connected client. The device information - * returned is the device model as well as the free space, the total capacity - * and blocksize on the accessed disk partition. - * - * @param client The client to get device info for. - * @param infos A char ** list of parameters as given by AFC or NULL if there - * was an error. - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_get_device_info(afc_client_t client, char ***infos) { uint32_t bytes = 0; @@ -526,17 +474,6 @@ afc_error_t afc_get_device_info(afc_client_t client, char ***infos) return ret; } -/** - * Get a specific key of the device info list for a client connection. - * Known key values are: Model, FSTotalBytes, FSFreeBytes and FSBlockSize. - * This is a helper function for afc_get_device_info(). - * - * @param client The client to get device info for. - * @param key The key to get the value of. - * @param value The value for the key if successful or NULL otherwise. - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_get_device_info_key(afc_client_t client, const char *key, char **value) { afc_error_t ret = AFC_E_INTERNAL_ERROR; @@ -564,14 +501,6 @@ afc_error_t afc_get_device_info_key(afc_client_t client, const char *key, char * return ret; } -/** - * Deletes a file or directory. - * - * @param client The client to use. - * @param path The path to delete. (must be a fully-qualified path) - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_remove_path(afc_client_t client, const char *path) { uint32_t bytes = 0; @@ -600,15 +529,6 @@ afc_error_t afc_remove_path(afc_client_t client, const char *path) return ret; } -/** - * Renames a file or directory on the device. - * - * @param client The client to have rename. - * @param from The name to rename from. (must be a fully-qualified path) - * @param to The new name. (must also be a fully-qualified path) - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_rename_path(afc_client_t client, const char *from, const char *to) { char *buffer = (char *) malloc(sizeof(char) * (strlen(from) + strlen(to) + 1 + sizeof(uint32_t))); @@ -638,15 +558,6 @@ afc_error_t afc_rename_path(afc_client_t client, const char *from, const char *t return ret; } -/** - * Creates a directory on the device. - * - * @param client The client to use to make a directory. - * @param dir The directory's path. (must be a fully-qualified path, I assume - * all other mkdir restrictions apply as well) - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_make_directory(afc_client_t client, const char *dir) { uint32_t bytes = 0; @@ -671,17 +582,6 @@ afc_error_t afc_make_directory(afc_client_t client, const char *dir) return ret; } -/** - * Gets information about a specific file. - * - * @param client The client to use to get the information of the file. - * @param path The fully-qualified path to the file. - * @param infolist Pointer to a buffer that will be filled with a NULL-terminated - * list of strings with the file information. - * Set to NULL before calling this function. - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_get_file_info(afc_client_t client, const char *path, char ***infolist) { char *received = NULL; @@ -712,19 +612,6 @@ afc_error_t afc_get_file_info(afc_client_t client, const char *path, char ***inf return ret; } -/** - * Opens a file on the device. - * - * @param client The client to use to open the file. - * @param filename The file to open. (must be a fully-qualified path) - * @param file_mode The mode to use to open the file. Can be AFC_FILE_READ or - * AFC_FILE_WRITE; the former lets you read and write, - * however, and the second one will *create* the file, - * destroying anything previously there. - * @param handle Pointer to a uint64_t that will hold the handle of the file - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ idevice_error_t afc_file_open(afc_client_t client, const char *filename, afc_file_mode_t file_mode, uint64_t *handle) @@ -772,17 +659,6 @@ afc_file_open(afc_client_t client, const char *filename, return ret; } -/** - * Attempts to the read the given number of bytes from the given file. - * - * @param client The relevant AFC client - * @param handle File handle of a previously opened file - * @param data The pointer to the memory region to store the read data - * @param length The number of bytes to read - * @param bytes_read The number of bytes actually read. - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ idevice_error_t afc_file_read(afc_client_t client, uint64_t handle, char *data, uint32_t length, uint32_t *bytes_read) { @@ -837,17 +713,6 @@ afc_file_read(afc_client_t client, uint64_t handle, char *data, uint32_t length, return ret; } -/** - * Writes a given number of bytes to a file. - * - * @param client The client to use to write to the file. - * @param handle File handle of previously opened file. - * @param data The data to write to the file. - * @param length How much data to write. - * @param bytes_written The number of bytes actually written to the file. - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ idevice_error_t afc_file_write(afc_client_t client, uint64_t handle, const char *data, uint32_t length, uint32_t *bytes_written) { @@ -881,12 +746,6 @@ afc_file_write(afc_client_t client, uint64_t handle, const char *data, uint32_t return ret; } -/** - * Closes a file on the device. - * - * @param client The client to close the file with. - * @param handle File handle of a previously opened file. - */ afc_error_t afc_file_close(afc_client_t client, uint64_t handle) { uint32_t bytes = 0; @@ -915,18 +774,6 @@ afc_error_t afc_file_close(afc_client_t client, uint64_t handle) return ret; } -/** - * Locks or unlocks a file on the device. - * - * makes use of flock on the device, see - * http://developer.apple.com/documentation/Darwin/Reference/ManPages/man2/flock.2.html - * - * @param client The client to lock the file with. - * @param handle File handle of a previously opened file. - * @param operation the lock or unlock operation to perform, this is one of - * AFC_LOCK_SH (shared lock), AFC_LOCK_EX (exclusive lock), - * or AFC_LOCK_UN (unlock). - */ afc_error_t afc_file_lock(afc_client_t client, uint64_t handle, afc_lock_op_t operation) { uint32_t bytes = 0; @@ -961,16 +808,6 @@ afc_error_t afc_file_lock(afc_client_t client, uint64_t handle, afc_lock_op_t op return ret; } -/** - * Seeks to a given position of a pre-opened file on the device. - * - * @param client The client to use to seek to the position. - * @param handle File handle of a previously opened. - * @param offset Seek offset. - * @param whence Seeking direction, one of SEEK_SET, SEEK_CUR, or SEEK_END. - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_file_seek(afc_client_t client, uint64_t handle, int64_t offset, int whence) { uint32_t bytes = 0; @@ -1004,15 +841,6 @@ afc_error_t afc_file_seek(afc_client_t client, uint64_t handle, int64_t offset, return ret; } -/** - * Returns current position in a pre-opened file on the device. - * - * @param client The client to use. - * @param handle File handle of a previously opened file. - * @param position Position in bytes of indicator - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_file_tell(afc_client_t client, uint64_t handle, uint64_t *position) { char *buffer = (char *) malloc(sizeof(char) * 8); @@ -1047,18 +875,6 @@ afc_error_t afc_file_tell(afc_client_t client, uint64_t handle, uint64_t *positi return ret; } -/** - * Sets the size of a file on the device. - * - * @param client The client to use to set the file size. - * @param handle File handle of a previously opened file. - * @param newsize The size to set the file to. - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - * - * @note This function is more akin to ftruncate than truncate, and truncate - * calls would have to open the file before calling this, sadly. - */ afc_error_t afc_file_truncate(afc_client_t client, uint64_t handle, uint64_t newsize) { uint32_t bytes = 0; @@ -1090,15 +906,6 @@ afc_error_t afc_file_truncate(afc_client_t client, uint64_t handle, uint64_t new return ret; } -/** - * Sets the size of a file on the device without prior opening it. - * - * @param client The client to use to set the file size. - * @param path The path of the file to be truncated. - * @param newsize The size to set the file to. - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_truncate(afc_client_t client, const char *path, uint64_t newsize) { char *buffer = (char *) malloc(sizeof(char) * (strlen(path) + 1 + 8)); @@ -1129,16 +936,6 @@ afc_error_t afc_truncate(afc_client_t client, const char *path, uint64_t newsize return ret; } -/** - * Creates a hard link or symbolic link on the device. - * - * @param client The client to use for making a link - * @param linktype 1 = hard link, 2 = symlink - * @param target The file to be linked. - * @param linkname The name of link. - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_make_link(afc_client_t client, afc_link_type_t linktype, const char *target, const char *linkname) { char *buffer = (char *) malloc(sizeof(char) * (strlen(target)+1 + strlen(linkname)+1 + 8)); @@ -1173,15 +970,6 @@ afc_error_t afc_make_link(afc_client_t client, afc_link_type_t linktype, const c return ret; } -/** - * Sets the modification time of a file on the device. - * - * @param client The client to use to set the file size. - * @param path Path of the file for which the modification time should be set. - * @param mtime The modification time to set in nanoseconds since epoch. - * - * @return AFC_E_SUCCESS on success or an AFC_E_* error value. - */ afc_error_t afc_set_file_time(afc_client_t client, const char *path, uint64_t mtime) { char *buffer = (char *) malloc(sizeof(char) * (strlen(path) + 1 + 8)); |