remove libusbmuxd sources and adapt source tree to use autotools

libusbmuxd has been split off and is now managed in a separate repository.
By the time of this commit, the repository is:
git clone http://git.sukimashita.com/libusbmuxd.git

1 files changed, 0 insertions, 598 deletions

diff --git a/daemon/usb-linux.c b/daemon/usb-linux.c
deleted file mode 100644
index 334d967..0000000
--- a/daemon/usb-linux.c
+++ /dev/null
@@ -1,598 +0,0 @@
-/*
-	usbmuxd - iPhone/iPod Touch USB multiplex server daemon
-
-Copyright (C) 2009	Hector Martin "marcan" <hector@marcansoft.com>
-Copyright (C) 2009	Nikias Bassen <nikias@gmx.li>
-Copyright (C) 2009	Martin Szulecki <opensuse@sukimashita.com>
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 or version 3.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <string.h>
-
-#include <libusb.h>
-
-#include "usb.h"
-#include "log.h"
-#include "device.h"
-
-// interval for device connection/disconnection polling, in milliseconds
-// we need this because there is currently no asynchronous device discovery mechanism in libusb
-#define DEVICE_POLL_TIME 1000
-
-struct usb_device {
-	libusb_device_handle *dev;
-	uint8_t bus, address;
-	uint16_t vid, pid;
-	char serial[256];
-	int alive;
-	uint8_t interface, ep_in, ep_out;
-	struct libusb_transfer *rx_xfer;
-	struct collection tx_xfers;
-	int wMaxPacketSize;
-};
-
-static struct collection device_list;
-
-static struct timeval next_dev_poll_time;
-
-static int devlist_failures;
-static int device_polling;
-
-static void usb_disconnect(struct usb_device *dev)
-{
-	if(!dev->dev) {
-		return;
-	}
-
-	// kill the rx xfer and tx xfers and try to make sure the callbacks get called before we free the device
-	if(dev->rx_xfer) {
-		usbmuxd_log(LL_DEBUG, "usb_disconnect: cancelling RX xfer");
-		libusb_cancel_transfer(dev->rx_xfer);
-	}
-	FOREACH(struct libusb_transfer *xfer, &dev->tx_xfers) {
-		usbmuxd_log(LL_DEBUG, "usb_disconnect: cancelling TX xfer %p", xfer);
-		libusb_cancel_transfer(xfer);
-	} ENDFOREACH
-
-	while(dev->rx_xfer || collection_count(&dev->tx_xfers)) {
-		struct timeval tv;
-		int res;
-
-		tv.tv_sec = 0;
-		tv.tv_usec = 1000;
-		if((res = libusb_handle_events_timeout(NULL, &tv)) < 0) {
-			usbmuxd_log(LL_ERROR, "libusb_handle_events_timeout for usb_disconnect failed: %d", res);
-			break;
-		}
-	}
-	collection_free(&dev->tx_xfers);
-	libusb_release_interface(dev->dev, dev->interface);
-	libusb_close(dev->dev);
-	dev->dev = NULL;
-	collection_remove(&device_list, dev);
-	free(dev);
-}
-
-static void tx_callback(struct libusb_transfer *xfer)
-{
-	struct usb_device *dev = xfer->user_data;
-	usbmuxd_log(LL_SPEW, "TX callback dev %d-%d len %d -> %d status %d", dev->bus, dev->address, xfer->length, xfer->actual_length, xfer->status);
-	if(xfer->status != LIBUSB_TRANSFER_COMPLETED) {
-		switch(xfer->status) {
-			case LIBUSB_TRANSFER_COMPLETED: //shut up compiler
-			case LIBUSB_TRANSFER_ERROR:
-				// funny, this happens when we disconnect the device while waiting for a transfer, sometimes
-				usbmuxd_log(LL_INFO, "Device %d-%d TX aborted due to error or disconnect", dev->bus, dev->address);
-				break;
-			case LIBUSB_TRANSFER_TIMED_OUT:
-				usbmuxd_log(LL_ERROR, "TX transfer timed out for device %d-%d", dev->bus, dev->address);
-				break;
-			case LIBUSB_TRANSFER_CANCELLED:
-				usbmuxd_log(LL_DEBUG, "Device %d-%d TX transfer cancelled", dev->bus, dev->address);
-				break;
-			case LIBUSB_TRANSFER_STALL:
-				usbmuxd_log(LL_ERROR, "TX transfer stalled for device %d-%d", dev->bus, dev->address);
-				break;
-			case LIBUSB_TRANSFER_NO_DEVICE:
-				// other times, this happens, and also even when we abort the transfer after device removal
-				usbmuxd_log(LL_INFO, "Device %d-%d TX aborted due to disconnect", dev->bus, dev->address);
-				break;
-			case LIBUSB_TRANSFER_OVERFLOW:
-				usbmuxd_log(LL_ERROR, "TX transfer overflow for device %d-%d", dev->bus, dev->address);
-				break;
-			// and nothing happens (this never gets called) if the device is freed after a disconnect! (bad)
-		}
-		// we can't usb_disconnect here due to a deadlock, so instead mark it as dead and reap it after processing events
-		// we'll do device_remove there too
-		dev->alive = 0;
-	}
-	if(xfer->buffer)
-		free(xfer->buffer);
-	collection_remove(&dev->tx_xfers, xfer);
-	libusb_free_transfer(xfer);
-}
-
-int usb_send(struct usb_device *dev, const unsigned char *buf, int length)
-{
-	int res;
-	struct libusb_transfer *xfer = libusb_alloc_transfer(0);
-	libusb_fill_bulk_transfer(xfer, dev->dev, dev->ep_out, (void*)buf, length, tx_callback, dev, 0);
-	if((res = libusb_submit_transfer(xfer)) < 0) {
-		usbmuxd_log(LL_ERROR, "Failed to submit TX transfer %p len %d to device %d-%d: %d", buf, length, dev->bus, dev->address, res);
-		libusb_free_transfer(xfer);
-		return res;
-	}
-	collection_add(&dev->tx_xfers, xfer);
-	if (length % dev->wMaxPacketSize == 0) {
-		usbmuxd_log(LL_DEBUG, "Send ZLP");
-		// Send Zero Length Packet
-		xfer = libusb_alloc_transfer(0);
-		void *buffer = malloc(1);
-		libusb_fill_bulk_transfer(xfer, dev->dev, dev->ep_out, buffer, 0, tx_callback, dev, 0);
-		if((res = libusb_submit_transfer(xfer)) < 0) {
-			usbmuxd_log(LL_ERROR, "Failed to submit TX ZLP transfer to device %d-%d: %d", dev->bus, dev->address, res);
-			libusb_free_transfer(xfer);
-			return res;
-		}
-		collection_add(&dev->tx_xfers, xfer);
-	}
-	return 0;
-}
-
-static void rx_callback(struct libusb_transfer *xfer)
-{
-	struct usb_device *dev = xfer->user_data;
-	usbmuxd_log(LL_SPEW, "RX callback dev %d-%d len %d status %d", dev->bus, dev->address, xfer->actual_length, xfer->status);
-	if(xfer->status == LIBUSB_TRANSFER_COMPLETED) {
-		device_data_input(dev, xfer->buffer, xfer->actual_length);
-		libusb_submit_transfer(xfer);
-	} else {
-		switch(xfer->status) {
-			case LIBUSB_TRANSFER_COMPLETED: //shut up compiler
-			case LIBUSB_TRANSFER_ERROR:
-				// funny, this happens when we disconnect the device while waiting for a transfer, sometimes
-				usbmuxd_log(LL_INFO, "Device %d-%d RX aborted due to error or disconnect", dev->bus, dev->address);
-				break;
-			case LIBUSB_TRANSFER_TIMED_OUT:
-				usbmuxd_log(LL_ERROR, "RX transfer timed out for device %d-%d", dev->bus, dev->address);
-				break;
-			case LIBUSB_TRANSFER_CANCELLED:
-				usbmuxd_log(LL_DEBUG, "Device %d-%d RX transfer cancelled", dev->bus, dev->address);
-				break;
-			case LIBUSB_TRANSFER_STALL:
-				usbmuxd_log(LL_ERROR, "RX transfer stalled for device %d-%d", dev->bus, dev->address);
-				break;
-			case LIBUSB_TRANSFER_NO_DEVICE:
-				// other times, this happens, and also even when we abort the transfer after device removal
-				usbmuxd_log(LL_INFO, "Device %d-%d RX aborted due to disconnect", dev->bus, dev->address);
-				break;
-			case LIBUSB_TRANSFER_OVERFLOW:
-				usbmuxd_log(LL_ERROR, "RX transfer overflow for device %d-%d", dev->bus, dev->address);
-				break;
-			// and nothing happens (this never gets called) if the device is freed after a disconnect! (bad)
-		}
-		free(xfer->buffer);
-		dev->rx_xfer = NULL;
-		libusb_free_transfer(xfer);
-		// we can't usb_disconnect here due to a deadlock, so instead mark it as dead and reap it after processing events
-		// we'll do device_remove there too
-		dev->alive = 0;
-	}
-}
-
-static int start_rx(struct usb_device *dev)
-{
-	int res;
-	void *buf;
-	dev->rx_xfer = libusb_alloc_transfer(0);
-	buf = malloc(USB_MRU);
-	libusb_fill_bulk_transfer(dev->rx_xfer, dev->dev, dev->ep_in, buf, USB_MRU, rx_callback, dev, 0);
-	if((res = libusb_submit_transfer(dev->rx_xfer)) != 0) {
-		usbmuxd_log(LL_ERROR, "Failed to submit RX transfer to device %d-%d: %d", dev->bus, dev->address, res);
-		libusb_free_transfer(dev->rx_xfer);
-		dev->rx_xfer = NULL;
-		return res;
-	}
-	return 0;
-}
-
-int usb_discover(void)
-{
-	int cnt, i, j, res;
-	int valid_count = 0;
-	libusb_device **devs;
-
-	cnt = libusb_get_device_list(NULL, &devs);
-	if(cnt < 0) {
-		usbmuxd_log(LL_WARNING, "Could not get device list: %d", cnt);
-		devlist_failures++;
-		// sometimes libusb fails getting the device list if you've just removed something
-		if(devlist_failures > 5) {
-			usbmuxd_log(LL_FATAL, "Too many errors getting device list\n");
-			return cnt;
-		} else {
-			gettimeofday(&next_dev_poll_time, NULL);
-			next_dev_poll_time.tv_usec += DEVICE_POLL_TIME * 1000;
-			next_dev_poll_time.tv_sec += next_dev_poll_time.tv_usec / 1000000;
-			next_dev_poll_time.tv_usec = next_dev_poll_time.tv_usec % 1000000;
-			return 0;
-		}
-	}
-	devlist_failures = 0;
-
-	usbmuxd_log(LL_SPEW, "usb_discover: scanning %d devices", cnt);
-
-	FOREACH(struct usb_device *usbdev, &device_list) {
-		usbdev->alive = 0;
-	} ENDFOREACH
-
-	for(i=0; i<cnt; i++) {
-		// the following are non-blocking operations on the device list
-		libusb_device *dev = devs[i];
-		uint8_t bus = libusb_get_bus_number(dev);
-		uint8_t address = libusb_get_device_address(dev);
-		struct libusb_device_descriptor devdesc;
-		int found = 0;
-		FOREACH(struct usb_device *usbdev, &device_list) {
-			if(usbdev->bus == bus && usbdev->address == address) {
-				valid_count++;
-				usbdev->alive = 1;
-				found = 1;
-				break;
-			}
-		} ENDFOREACH
-		if(found)
-			continue; //device already found
-		if((res = libusb_get_device_descriptor(dev, &devdesc)) != 0) {
-			usbmuxd_log(LL_WARNING, "Could not get device descriptor for device %d-%d: %d", bus, address, res);
-			continue;
-		}
-		if(devdesc.idVendor != VID_APPLE)
-			continue;
-		if((devdesc.idProduct < PID_RANGE_LOW) ||
-			(devdesc.idProduct > PID_RANGE_MAX))
-			continue;
-		libusb_device_handle *handle;
-		usbmuxd_log(LL_INFO, "Found new device with v/p %04x:%04x at %d-%d", devdesc.idVendor, devdesc.idProduct, bus, address);
-		// potentially blocking operations follow; they will only run when new devices are detected, which is acceptable
-		if((res = libusb_open(dev, &handle)) != 0) {
-			usbmuxd_log(LL_WARNING, "Could not open device %d-%d: %d", bus, address, res);
-			continue;
-		}
-		int current_config = 0;
-		if((res = libusb_get_configuration(handle, &current_config)) != 0) {
-			usbmuxd_log(LL_WARNING, "Could not get configuration for device %d-%d: %d", bus, address, res);
-			libusb_close(handle);
-			continue;
-		}
-		if (current_config != devdesc.bNumConfigurations) {
-			struct libusb_config_descriptor *config;
-			if((res = libusb_get_active_config_descriptor(dev, &config)) != 0) {
-				usbmuxd_log(LL_NOTICE, "Could not get old configuration descriptor for device %d-%d: %d", bus, address, res);
-			} else {
-				for(j=0; j<config->bNumInterfaces; j++) {
-					const struct libusb_interface_descriptor *intf = &config->interface[j].altsetting[0];
-					if((res = libusb_kernel_driver_active(handle, intf->bInterfaceNumber)) < 0) {
-						usbmuxd_log(LL_NOTICE, "Could not check kernel ownership of interface %d for device %d-%d: %d", intf->bInterfaceNumber, bus, address, res);
-						continue;
-					}
-					if(res == 1) {
-						usbmuxd_log(LL_INFO, "Detaching kernel driver for device %d-%d, interface %d", bus, address, intf->bInterfaceNumber);
-						if((res = libusb_detach_kernel_driver(handle, intf->bInterfaceNumber)) < 0) {
-							usbmuxd_log(LL_WARNING, "Could not detach kernel driver (%d), configuration change will probably fail!", res);
-							continue;
-						}
-					}
-				}
-				libusb_free_config_descriptor(config);
-			}
-			if((res = libusb_set_configuration(handle, devdesc.bNumConfigurations)) != 0) {
-				usbmuxd_log(LL_WARNING, "Could not set configuration %d for device %d-%d: %d", devdesc.bNumConfigurations, bus, address, res);
-				libusb_close(handle);
-				continue;
-			}
-		}
-
-		struct libusb_config_descriptor *config;
-		if((res = libusb_get_active_config_descriptor(dev, &config)) != 0) {
-			usbmuxd_log(LL_WARNING, "Could not get configuration descriptor for device %d-%d: %d", bus, address, res);
-			libusb_close(handle);
-			continue;
-		}
-
-		struct usb_device *usbdev;
-		usbdev = malloc(sizeof(struct usb_device));
-		memset(usbdev, 0, sizeof(*usbdev));
-
-		for(j=0; j<config->bNumInterfaces; j++) {
-			const struct libusb_interface_descriptor *intf = &config->interface[j].altsetting[0];
-			if(intf->bInterfaceClass != INTERFACE_CLASS ||
-			   intf->bInterfaceSubClass != INTERFACE_SUBCLASS ||
-			   intf->bInterfaceProtocol != INTERFACE_PROTOCOL)
-				continue;
-			if(intf->bNumEndpoints != 2) {
-				usbmuxd_log(LL_WARNING, "Endpoint count mismatch for interface %d of device %d-%d", intf->bInterfaceNumber, bus, address);
-				continue;
-			}
-			if((intf->endpoint[0].bEndpointAddress & 0x80) == LIBUSB_ENDPOINT_OUT &&
-			   (intf->endpoint[1].bEndpointAddress & 0x80) == LIBUSB_ENDPOINT_IN) {
-				usbdev->interface = intf->bInterfaceNumber;
-				usbdev->ep_out = intf->endpoint[0].bEndpointAddress;
-				usbdev->ep_in = intf->endpoint[1].bEndpointAddress;
-				usbmuxd_log(LL_INFO, "Found interface %d with endpoints %02x/%02x for device %d-%d", usbdev->interface, usbdev->ep_out, usbdev->ep_in, bus, address);
-				break;
-			} else if((intf->endpoint[1].bEndpointAddress & 0x80) == LIBUSB_ENDPOINT_OUT &&
-			          (intf->endpoint[0].bEndpointAddress & 0x80) == LIBUSB_ENDPOINT_IN) {
-				usbdev->interface = intf->bInterfaceNumber;
-				usbdev->ep_out = intf->endpoint[1].bEndpointAddress;
-				usbdev->ep_in = intf->endpoint[0].bEndpointAddress;
-				usbmuxd_log(LL_INFO, "Found interface %d with swapped endpoints %02x/%02x for device %d-%d", usbdev->interface, usbdev->ep_out, usbdev->ep_in, bus, address);
-				break;
-			} else {
-				usbmuxd_log(LL_WARNING, "Endpoint type mismatch for interface %d of device %d-%d", intf->bInterfaceNumber, bus, address);
-			}
-		}
-
-		if(j == config->bNumInterfaces) {
-			usbmuxd_log(LL_WARNING, "Could not find a suitable USB interface for device %d-%d", bus, address);
-			libusb_free_config_descriptor(config);
-			libusb_close(handle);
-			free(usbdev);
-			continue;
-		}
-
-		libusb_free_config_descriptor(config);
-
-		if((res = libusb_claim_interface(handle, usbdev->interface)) != 0) {
-			usbmuxd_log(LL_WARNING, "Could not claim interface %d for device %d-%d: %d", usbdev->interface, bus, address, res);
-			libusb_close(handle);
-			free(usbdev);
-			continue;
-		}
-
-		if((res = libusb_get_string_descriptor_ascii(handle, devdesc.iSerialNumber, (uint8_t *)usbdev->serial, 256)) <= 0) {
-			usbmuxd_log(LL_WARNING, "Could not get serial number for device %d-%d: %d", bus, address, res);
-			libusb_release_interface(handle, usbdev->interface);
-			libusb_close(handle);
-			free(usbdev);
-			continue;
-		}
-		usbdev->serial[res] = 0;
-		usbdev->bus = bus;
-		usbdev->address = address;
-		usbdev->vid = devdesc.idVendor;
-		usbdev->pid = devdesc.idProduct;
-		usbdev->dev = handle;
-		usbdev->alive = 1;
-		usbdev->wMaxPacketSize = libusb_get_max_packet_size(dev, usbdev->ep_out);
-		if (usbdev->wMaxPacketSize <= 0) {
-			usbmuxd_log(LL_ERROR, "Could not determine wMaxPacketSize for device %d-%d, setting to 64", usbdev->bus, usbdev->address);
-			usbdev->wMaxPacketSize = 64;
-		} else {
-			usbmuxd_log(LL_INFO, "Using wMaxPacketSize=%d for device %d-%d", usbdev->wMaxPacketSize, usbdev->bus, usbdev->address);
-		}
-
-		collection_init(&usbdev->tx_xfers);
-
-		collection_add(&device_list, usbdev);
-
-		if(device_add(usbdev) < 0) {
-			usb_disconnect(usbdev);
-			continue;
-		}
-		if(start_rx(usbdev) < 0) {
-			device_remove(usbdev);
-			usb_disconnect(usbdev);
-			continue;
-		}
-		valid_count++;
-	}
-	FOREACH(struct usb_device *usbdev, &device_list) {
-		if(!usbdev->alive) {
-			device_remove(usbdev);
-			usb_disconnect(usbdev);
-		}
-	} ENDFOREACH
-
-	libusb_free_device_list(devs, 1);
-
-	gettimeofday(&next_dev_poll_time, NULL);
-	next_dev_poll_time.tv_usec += DEVICE_POLL_TIME * 1000;
-	next_dev_poll_time.tv_sec += next_dev_poll_time.tv_usec / 1000000;
-	next_dev_poll_time.tv_usec = next_dev_poll_time.tv_usec % 1000000;
-
-	return valid_count;
-}
-
-const char *usb_get_serial(struct usb_device *dev)
-{
-	if(!dev->dev) {
-		return NULL;
-	}
-	return dev->serial;
-}
-
-uint32_t usb_get_location(struct usb_device *dev)
-{
-	if(!dev->dev) {
-		return 0;
-	}
-	return (dev->bus << 16) | dev->address;
-}
-
-uint16_t usb_get_pid(struct usb_device *dev)
-{
-	if(!dev->dev) {
-		return 0;
-	}
-	return dev->pid;
-}
-
-void usb_get_fds(struct fdlist *list)
-{
-	const struct libusb_pollfd **usbfds;
-	const struct libusb_pollfd **p;
-	usbfds = libusb_get_pollfds(NULL);
-	if(!usbfds) {
-		usbmuxd_log(LL_ERROR, "libusb_get_pollfds failed");
-		return;
-	}
-	p = usbfds;
-	while(*p) {
-		fdlist_add(list, FD_USB, (*p)->fd, (*p)->events);
-		p++;
-	}
-	free(usbfds);
-}
-
-void usb_autodiscover(int enable)
-{
-	usbmuxd_log(LL_DEBUG, "usb polling enable: %d", enable);
-	device_polling = enable;
-}
-
-static int dev_poll_remain_ms(void)
-{
-	int msecs;
-	struct timeval tv;
-	if(!device_polling)
-		return 100000; // devices will never be polled if this is > 0
-	gettimeofday(&tv, NULL);
-	msecs = (next_dev_poll_time.tv_sec - tv.tv_sec) * 1000;
-	msecs += (next_dev_poll_time.tv_usec - tv.tv_usec) / 1000;
-	if(msecs < 0)
-		return 0;
-	return msecs;
-}
-
-int usb_get_timeout(void)
-{
-	struct timeval tv;
-	int msec;
-	int res;
-	int pollrem;
-	pollrem = dev_poll_remain_ms();
-	res = libusb_get_next_timeout(NULL, &tv);
-	if(res == 0)
-		return pollrem;
-	if(res < 0) {
-		usbmuxd_log(LL_ERROR, "libusb_get_next_timeout failed: %d", res);
-		return pollrem;
-	}
-	msec = tv.tv_sec * 1000;
-	msec += tv.tv_usec / 1000;
-	if(msec > pollrem)
-		return pollrem;
-	return msec;
-}
-
-int usb_process(void)
-{
-	int res;
-	struct timeval tv;
-	tv.tv_sec = tv.tv_usec = 0;
-	res = libusb_handle_events_timeout(NULL, &tv);
-	if(res < 0) {
-		usbmuxd_log(LL_ERROR, "libusb_handle_events_timeout failed: %d", res);
-		return res;
-	}
-	// reap devices marked dead due to an RX error
-	FOREACH(struct usb_device *usbdev, &device_list) {
-		if(!usbdev->alive) {
-			device_remove(usbdev);
-			usb_disconnect(usbdev);
-		}
-	} ENDFOREACH
-
-	if(dev_poll_remain_ms() <= 0) {
-		res = usb_discover();
-		if(res < 0) {
-			usbmuxd_log(LL_ERROR, "usb_discover failed: %d", res);
-			return res;
-		}
-	}
-	return 0;
-}
-
-int usb_process_timeout(int msec)
-{
-	int res;
-	struct timeval tleft, tcur, tfin;
-	gettimeofday(&tcur, NULL);
-	tfin.tv_sec = tcur.tv_sec + (msec / 1000);
-	tfin.tv_usec = tcur.tv_usec + (msec % 1000) * 1000;
-	tfin.tv_sec += tfin.tv_usec / 1000000;
-	tfin.tv_usec %= 1000000;
-	while((tfin.tv_sec > tcur.tv_sec) || ((tfin.tv_sec == tcur.tv_sec) && (tfin.tv_usec > tcur.tv_usec))) {
-		tleft.tv_sec = tfin.tv_sec - tcur.tv_sec;
-		tleft.tv_usec = tfin.tv_usec - tcur.tv_usec;
-		if(tleft.tv_usec < 0) {
-			tleft.tv_usec += 1000000;
-			tleft.tv_sec -= 1;
-		}
-		res = libusb_handle_events_timeout(NULL, &tleft);
-		if(res < 0) {
-			usbmuxd_log(LL_ERROR, "libusb_handle_events_timeout failed: %d", res);
-			return res;
-		}
-		// reap devices marked dead due to an RX error
-		FOREACH(struct usb_device *usbdev, &device_list) {
-			if(!usbdev->alive) {
-				device_remove(usbdev);
-				usb_disconnect(usbdev);
-			}
-		} ENDFOREACH
-	gettimeofday(&tcur, NULL);
-	}
-	return 0;
-}
-
-int usb_init(void)
-{
-	int res;
-	usbmuxd_log(LL_DEBUG, "usb_init for linux / libusb 1.0");
-
-	devlist_failures = 0;
-	device_polling = 1;
-	res = libusb_init(NULL);
-	//libusb_set_debug(NULL, 3);
-	if(res != 0) {
-		usbmuxd_log(LL_FATAL, "libusb_init failed: %d", res);
-		return -1;
-	}
-
-	collection_init(&device_list);
-
-	return usb_discover();
-}
-
-void usb_shutdown(void)
-{
-	usbmuxd_log(LL_DEBUG, "usb_shutdown");
-	FOREACH(struct usb_device *usbdev, &device_list) {
-		device_remove(usbdev);
-		usb_disconnect(usbdev);
-	} ENDFOREACH
-	collection_free(&device_list);
-	libusb_exit(NULL);
-}