usbmuxd - A socket daemon to multiplex connections from and to iOS devices

Age	Commit message (Collapse)	Author	Files	Lines
2018-10-02	preflight: Fix compatibility with latest internal changes to libimobiledevice	Nikias Bassen	1	-1/+5

2018-09-15	client: Send 'Paired' message when a device's pairing record has been stored ↵	Nikias Bassen	3	-1/+60
	successfully This requires the SavePairRecord message sent from the client to contain a usbmux device id so the device can be matched accordingly. For the record: This is the original behavior.
2018-07-23	client: Implement ListListeners command	Nikias Bassen	1	-4/+117

2018-05-15	device: Flush buffer to client when remote side unexpectedly terminates ↵	Nikias Bassen	2	-2/+16
	connection
2018-05-15	client: Set socket options for client connections to improve performance	Nikias Bassen	1	-0/+12

2018-05-09	Remove whitespace errors	Nikias Bassen	1	-6/+6

2018-04-09	log: Fix timestamps being printed incorrectly when running in foreground	Nikias Bassen	1	-5/+11
	Due to usage of wrong function (get_tick_count) the timestamps have been printed incorrectly based on clock_gettime. This commit fixes it by using gettimeofday correctly and also makes sure that this is thread-safe by using localtime_r if available. Furthermore, this commit will also have the effect that when logging through syslog we don't determine the current time anymore because the timestamp is not even used.
2018-01-31	usb: Remove leftover debug log output	Nikias Bassen	1	-1/+0

2018-01-08	Fix typo in error message.	Carlos Maddela	1	-1/+1

2018-01-08	usb: Fix calculation of RX loop count	Nikias Bassen	1	-0/+1

2018-01-08	usb: Use heap buffer instead of making the usb_device struct larger	Nikias Bassen	1	-6/+18
	Since this buffer is only used during device initialization we don't want the usb_device struct to be unecessary big.
2018-01-08	usb: Use libusb asynchronous I/O for getting initial device information.	Alexis Ballier	1	-35/+111
	usb_device_add may now be called from libusb main loop via the hotplug callbacks. No blocking call must occur there and libusb 1.0.21 now returns an error when trying to perform blocking I/O in this callback. Should fix the error when hotpluging a device reported in #81
2018-01-08	usb: Store the whole device descriptor in struct usb_device	Alexis Ballier	1	-4/+3

2017-12-28	client: Plug memory leak	Rudolf Tammekivi	1	-0/+1

2017-10-29	conf: Report an error if writing to config file fails	Nikias Bassen	1	-3/+8

2017-10-29	Better error handling when saving pair records	Frederik Carlier	2	-12/+34
	plist_write_to_filename and buffer_write_to_filename now return 0 if the actual write operation failed (e.g. because access is denied to the file), and set errno if required.
2017-07-17	utils: Use autoconf to check for availability of clock_gettime()	Nikias Bassen	1	-1/+1

2016-01-28	Try to autodetect ppoll(2) instead of hardcoding the list of platforms ↵	Jan Beich	1	-1/+1
	lacking it thus using fallback.
2016-01-28	device: Plug small memory leak	Nikias Bassen	1	-0/+1

2016-01-28	Fix debug message printing the wrong timeout value	Nikias Bassen	1	-1/+1

2016-01-28	Add a static clock_gettime() substitute for OS X.	Aaron Burghardt	1	-0/+33

2015-07-31	internal_get_value: fix over-free of node returned by plist_dict_get_item.	Aaron Burghardt	1	-1/+0

2015-07-31	send_system_buid: fix leak of buid string returned by config_get_system_buid.	Aaron Burghardt	1	-0/+1

2014-12-02	preflight: Remove obsoleted extern function declarations	Nikias Bassen	1	-3/+0

2014-12-02	usb: Implement device discovery using libusb hotplug events	Nikias Bassen	1	-202/+268

2014-12-02	Rename usb-linux.c to more suitable usb.c	Nikias Bassen	2	-2/+2

2014-11-12	Use non-blocking sockets for client communication	Nikias Bassen	2	-1/+31
	This approach is better than using blocking sockets and select() since there's no guarantee that send() doesn't block. Plus we're using poll() anyway so send() and recv() will only be called if the socket is actually ready for writing/reading.
2014-11-12	Revert "client: Make sure fd is writable before calling send() to avoid ↵	Nikias Bassen	1	-18/+1
	blocking" This reverts commit 23ecea077d8f22d9da5cae50df3e2ff3406fee90.
2014-11-11	client: Make sure fd is writable before calling send() to avoid blocking	Nikias Bassen	1	-1/+18

2014-11-11	Get USB speed for device and use it for device attached client message	Martin Szulecki	5	-2/+34

2014-11-11	client: Remove invalid line feed from log message	Nikias Bassen	1	-1/+1

2014-11-11	client: Log pid of connecting clients (if supported)	Nikias Bassen	1	-0/+16

2014-11-11	Use new get_tick_count() to avoid timing issues on packets	Martin Szulecki	4	-9/+24

2014-10-17	Make sure usbmuxd-proto.h file is added to distribution	Martin Szulecki	1	-1/+1

2014-10-16	Only conditionally compile bits of udev and systemd support	Martin Szulecki	1	-1/+21

2014-10-14	Fix support for more than one device with systemd by extending usbmuxd usage	Martin Szulecki	1	-15/+41
	Upon connecting a new device, usbmuxd was not notified to scan for it if systemd was used as the activation method. This change introduces the "--disable-hotplug" and "--enable-exit" options to have a finer control over usbmuxd's signaling behavior. The convenience option "--systemd" complements the "--udev" option and setups the right settings for systemd.
2014-10-14	Fix broken "--user" option which didn't accept an argument	Martin Szulecki	1	-1/+1

2014-10-14	Slightly clean up CFLAGS in Makefile.am	Martin Szulecki	1	-4/+5

2014-10-06	Update and slightly cleanup copyright headers	Martin Szulecki	16	-307/+291

2014-09-19	Flush input buffer for a client connection when calling connection_teardown().	Satoshi Ohgoh	1	-0/+16
	Signed-off-by: Martin Szulecki <m.szulecki@libimobiledevice.org>
2014-09-13	Properly rename header guards according to C++ standard	Nikias Bassen	8	-18/+18

2014-05-27	Use protocol version 2 by default	Nikias Bassen	1	-1/+1

2014-05-27	device: Add protocol version 2 support	Nikias Bassen	1	-12/+83

2014-05-27	client: Fix crash that occured when receiving client command from old client	Martin Szulecki	1	-0/+5

2014-05-27	Fix detection of new "-V" version argument	Martin Szulecki	1	-1/+1

2014-05-07	Fix connection abort if device buffer is full	Peter Wu	1	-3/+4
	When trying to upload a IPSW filesystem to an iPad, the process would randomly stop somewhere at 3% or 10%. It is possible that the receive buffer of the iPad is full. To prevent erroring out because size == conn->sendable == 0, skip reading from the client. There is a similar case where the clients is ready to accept data, but the device has no data to send. Apply a similar fix there. Hopefully the device is fast enough to reply in the next main loop iteration, otherwise the CPU usage of usbmux will spike because the client socket is ready while there is no data to process...
2014-05-06	utils: Add missing plist_read_from_filename() helper	Nikias Bassen	1	-0/+25

2014-04-16	preflight: Unset preflight callback data when no longer needed to prevent ↵	Nikias Bassen	1	-0/+2
	segfault
2014-03-27	Add "--version" option to print version number and exit, useful for bug reports	Martin Szulecki	1	-0/+5

2014-03-27	Update command usage output to match best practice and other tools	Martin Szulecki	1	-10/+11